This consolidation is unofficial and is for reference only.

For the official version of the regulations, consult the original documents on file with the Office of the Registrar of Regulations , or refer to the Royal Gazette

Part II .

Regulations are amended frequently.

Please check the list of Regulations by Act to see if there are any recent amendments to these regulations filed with our office that are not yet included in this consolidation.

Although every effort has been made to ensure the accuracy of this electronic version, the Office of the Registrar of Regulations assumes no responsibility for any discrepancies that may have resulted from reformatting.

This electronic version is copyright ©

, Province of Nova Scotia , all rights reserved. It is for your personal use and may not be copied for the purposes of resale in this or any other form.

Carpenter Trade Regulations

made under

Section 17A of the

Apprenticeship and Trades Qualifications Act

S.N.S. 2003, c. 1

N.S. Reg. 207/2016 (effective April 1, 2017)

amended to N.S. Reg. 146/2022 (effective July 6, 2022)

Table of Contents

Please note: this table of contents is provided for convenience of reference and does not form part of the regulations.

Click here to go to the text of the regulations .

Citation

Definitions

Term of apprenticeship for carpenter trade

Wage

schedule for apprentices in carpenter trade

Certificate in carpenter trade through trade qualification

Compliance with identity card requirements of General Regulations

Transition

Citation

1 These trade regulations may be cited as the Carpenter Trade Regulations .

Definitions

(1) In these regulations,

“Act” means the Apprenticeship and Trades Qualifications Act ;

“carpenter trade” means the occupation of a carpenter, consisting of constructing,

repairing or altering buildings;

“General Regulations” means the Apprenticeship and Trades Qualifications Act

General Regulations made under the Act.

(2) A term defined in the General Regulations has the same meaning when used in

these regulations.

Term of apprenticeship for carpenter trade

(1) The term of apprenticeship for the carpenter trade consists of all of the following:

(a) 7200 documented hours of the combination of practical experience and the

portion of technical training spent learning the skills of the designated trade

as described in clause 26(1A)(

a) of the General Regulations and as

approved by the Director;

(

b) related technical training as described in clause 26(1A)(

b) of the General

Regulations and as approved by the Director;

(

c) a certification examination.

(2) Any probationary period included in a term of apprenticeship for the carpenter

trade as permitted by subsection 12(2) of the General Regulations must be no

longer than 3 months.

4 [repealed]

Wage

schedule for apprentices in carpenter trade

(1) Subject to subsection (2) and to subsection 25(3) of the General Regulations, the

minimum wage for each hour worked by a carpenter apprentice in each portion of

a level in their term of apprenticeship is a percentage of the wage for a carpenter

journeyperson in the same place of employment, as set out in the following table:

Wages for Carpenter Apprentice

Level of

Apprenticeship

Hours in Portion of

Level of Apprenticeship

Minimum Wage

(% of journeyperson’s wage)

0–900

55%

901–1800

60%

1801–2700

65%

2701–3600

70%

3601–4500

75%

4501–5400

80%

5401–6300

85%

6301–7200

90%

(2) An employer must not employ a carpenter apprentice at a wage for actual hours

worked that is lower than the wage that would be paid at the minimum wage rate

prescribed in the Minimum Wage Order (General) made under the Labour

Standards Code .

Certificate in carpenter trade through trade qualification

6 The period of employment in the designated trade that is required by paragraph

30(1)(a)(ii)(

B) of the General Regulations for a person who does not hold a certificate of

apprenticeship and is applying for a certificate of qualification in the carpenter trade is

10 800 hours.

Compliance with identity card requirements of General Regulations

7 For the purposes of

Section 34 of the General Regulations, which requires an apprentice

or journeyperson to keep their identity card in their possession when practising the

designated trade and produce it on request, a person is practising the carpenter trade

while the person is doing any of the following:

(

a) for an apprentice,

(

i) acquiring practical experience in the trade, or

(ii) learning the skills of the trade during the technical training portion of

apprenticeship training;

(

b) for a journeyperson, performing the duties of the trade as defined in these

regulations or their duties as set out in the General Regulations.

Transition

8 A person who, immediately before the coming into force of these regulations, was an

apprentice in an apprenticeship program under the trade regulations respecting the

carpenter trade, N.S. Reg. 85/1982, continues as an apprentice in that apprenticeship

program under these regulations.

Legislative History

Reference Tables

Carpenter Trade Regulations

N.S. Reg.

207/2016

Apprenticeship and Trades Qualifications Act

Note: The

information in these tables does not form part of the regulations and is

compiled by the Office of the Registrar of Regulations for reference only.

Source Law

The current consolidation of the Carpenter Trade Regulations made under the Apprenticeship and Trades Qualifications Act includes all of the following regulations:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

207/2016

Apr 1, 2017

date specified

Oct 28, 2016

146/2022

Jul 6, 2022

date filed

Jul 15, 2022

The following regulations are not

yet in force and are not included in the current consolidation:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

*See subsection 3(6) of the Regulations Act for

rules about in force dates of regulations.

Amendments by Provision

ad. = added

am. = amended

fc. = fee change

ra. = reassigned

rep. = repealed

rs . = repealed and substituted

Provision affected

How affected

4 ........................................................

rep. 146/2022

Note that changes to headings are not

included in the above table.

Editorial Notes and Corrections

Note

Effective

date

Repealed and Superseded

N.S.

Regulation

Title

In force

date

Repealed

date

85/1982

Carpenter Trade Regulations

Apr 20, 1982

Apr 1, 2017

Note: Only

regulations that are specifically repealed and replaced appear in this

table. It may not reflect the entire

history of regulations on this subject matter.