Copyright © Queen's Printer,

Victoria, British Columbia, Canada

Licence

Disclaimer

Volume 59, No. 12

164/2016

The British Columbia Gazette,

Part II

July 12, 2016

B.C. Reg. 164/2016 , deposited July 4, 2016, under the MOTOR VEHICLE ACT [section 210 (2) (

a) and (9)]. Order in Council 491/2016, approved and ordered June 30, 2016.

On the recommendation of the undersigned, the Lieutenant Governor, by and with the advice and consent of the Executive Council, orders that the Motor Vehicle Act Regulations, B.C. Reg. 26/58, are amended as set out in the attached Schedule.

— T. STONE, Minister of Transportation and Infrastructure ; W. BENNETT, Presiding Member of the Executive Council .

Schedule

Section 7.01 of the Motor Vehicle Act Regulations, B.C. Reg. 26/58, is amended

(

a) in subsection (1) by striking out “ (3), ” and substituting “ (4), ”,

(

b) by repealing subsection (2) and substituting the following:

(2) An antique motor vehicle or a collector motor vehicle not originally designed and manufactured to be in compliance with

section 7.02 to 7.04, 7.05 (3), (4) or (7), 7.06, 7.09, 7.16, 7.161 (4) or 7.19 need not be equipped as required by that section. , and

(

c) by adding the following subsections:

(4) A person may drive or operate on a highway a motor vehicle that is not equipped as required by

section 7.06 if

(

a) the motor vehicle is

(

i) a collector motor vehicle that

(

A) has a licence and distinctive number plate issued for a collector motor vehicle under Division 22A for the current year,

(

B) was manufactured in 1940 or earlier, and

(

C) is described in Item 3 of the table in

section 22A.01 (1) (c),

(ii) a motor vehicle

(

A) that is duly registered outside British Columbia,

(

B) for which the licensing requirements of the jurisdiction in which it is registered are fulfilled,

(

C) that has displayed on it the registration number plates of that jurisdiction for the current year,

(

D) that was manufactured in 1940 or earlier, and

(

E) that is described in Item 3 (

b) of the table in

section 22A.01 (1) (c), or

(iii) a replicar or replikit

(

A) that is duly registered inside or outside British Columbia,

(

B) for which the licensing requirements of the jurisdiction in which it is registered are fulfilled,

(

C) that has displayed on it the registration number plates of that jurisdiction for the current year, and

(

D) that was manufactured, as in the case of a replicar, or was designed, as in the case of a replikit, to resemble the make and model of a motor vehicle manufactured in 1940 or earlier, and

(

b) the highway is dry and paved.

(5) In this section:

(a) “replicar” means a motor vehicle that is

(

i) manufactured to resemble the make and model of a motor vehicle which is no longer manufactured, and

(ii) constructed entirely of new components;

(b) “replikit” means a motor vehicle that is

(

i) designed to resemble the make and model of a motor vehicle which is no longer manufactured, and

(ii) constructed of new or refurbished components.

Section 40.01 (1) is amended by repealing the

definitions of “replicar” and “replikit” and substituting the following:

“replicar” means a motor vehicle as defined in

section 7.01 (5) (a);

“replikit” means a motor vehicle as defined in

section 7.01 (5) (b); .

Copyright © 2016: Queen's Printer, Victoria, British Columbia, Canada