This consolidation is unofficial and is for reference only.

For the official version of the regulations, consult the original documents on file with the Office of the Registrar of Regulations , or refer to the Royal Gazette

Part II .

Regulations are amended frequently.

Please check the list of Regulations by Act to see if there are any recent amendments to these regulations filed with our office that are not yet included in this consolidation.

Although every effort has been made to ensure the accuracy of this electronic version, the Office of the Registrar of Regulations assumes no responsibility for any discrepancies that may have resulted from reformatting.

This electronic version is copyright ©

, Province of Nova Scotia , all rights reserved. It is for your personal use and may not be copied for the purposes of resale in this or any other form.

Steamfitter/Pipefitter Trade Regulations

made under subsection 17A(2) of the

Apprenticeship and Trades Qualifications Act

S.N.S. 2003, c. 1

O.I.C. 2016-239 (effective April 1, 2017), N.S. Reg. 195/2016

amended to O.I.C. 2025-272 (effective October 6, 2025), N.S. Reg. 209/2025

Table of Contents

Please note: this table of contents is provided for convenience of reference and does not form part of the regulations.

Click here to go to the text of the regulations .

Citation

Definitions

Steamfitter/pipefitter trade is compulsory certified trade

Person other than steamfitter/pipefitter performing work in trade

Exemption application under General Regulations permitted for steamfitter/pipefitter

trade

Term of apprenticeship for steamfitter/pipefitter trade

Wage

schedule for apprentices in steamfitter/pipefitter trade

Certificate in steamfitter/pipefitter trade through trade qualification

Compliance with identity card requirements of General Regulations

Transition

Citation

1 These trade regulations may be cited as the Steamfitter/Pipefitter Trade Regulations .

Definitions

(1) In these regulations,

“Act” means the Apprenticeship and Trades Qualifications Act ;

“General Regulations” means the Apprenticeship and Trades Qualifications Act

General Regulations made under the Act;

“steamfitter/pipefitter trade” means the occupation of a steamfitter/pipefitter,

consisting of fabricating, installing, altering, maintaining and repairing any type of

residential, commercial or industrial piping system, including all of the following:

(

i) hot liquid systems,

(ii) high- and low-pressure steam systems,

(iii) boilers and controls for boilers,

(iv) control and indicating devices systems,

(

v) heating and cooling systems,

(vi) heat exchanger systems,

(vii) process systems,

(viii) power plant systems,

(ix) compressed gas systems,

(

x) vacuum, pneumatic and hydraulic systems,

(xi) fire protection systems other than sprinkler systems,

(xii) flue gases systems,

(xiii) water treatment systems.

(2) A term defined in the General Regulations has the same meaning when used in

these regulations.

Steamfitter/pipefitter trade is compulsory certified trade

3 The steamfitter/pipefitter trade is specified as a compulsory certified trade.

Person other than steamfitter/pipefitter performing work in trade

4 A person who does not hold a certificate of qualification in the steamfitter/pipefitter trade

may perform work included in the definition of the steamfitter/pipefitter trade if the

person holds a certificate of qualification in another designated trade and the work to be

performed comes within the scope of that other designated trade.

Exemption application under General Regulations permitted for steamfitter/pipefitter

trade

5 For the purposes of subsection 38(2) of the General Regulations, a joint application for

an exemption from the application of subsections 22(2) and (3) of the Act is permitted

for the steamfitter/pipefitter trade, but only if

(

a) the person who is the subject of the application is an employee of an

industrial or process plant and is trained to perform maintenance functions;

and

(

b) the work being performed involves repairing or modifying a piping system

as a component of the regular maintenance of the system.

Term of apprenticeship for steamfitter/pipefitter trade

(1) The term of apprenticeship for the steamfitter/pipefitter trade consists of all of the

following:

(a) 7200 documented hours of the combination of practical experience and the

portion of technical training spent learning the skills of the designated trade

as described in clause 26(1A)(

a) of the General Regulations and as

approved by the Director;

(

b) related technical training as described in clause 26(1A)(

b) of the General

Regulations and as approved by the Director;

(

c) a certification examination.

(2) Any probationary period included in a term of apprenticeship for the

steamfitter/pipefitter trade as permitted by subsection 12(2) of the General

Regulations must be no longer than 3 months.

7 [repealed]

Wage

schedule for apprentices in steamfitter/pipefitter trade

(1) Subject to subsection (2) and to subsection 25(3) of the General Regulations, the

minimum wage for each hour worked by a steamfitter/pipefitter apprentice in each

portion of a level of their term of an apprenticeship is a percentage of the wage for

a steamfitter/pipefitter journeyperson in the same place of employment, as set out

in the following table:

Wages for Steamfitter/Pipefitter Apprentice

Level of

Apprenticeship

Hours in Portion of

Level of Apprenticeship

Minimum Wage

(% of journeyperson’s wage)

0–900

45%

901–1800

50%

1801–2700

55%

2701–3600

60%

3601–4500

65%

4501–5400

70%

5401–6300

75%

6301–7200

80%

(2) An employer must not employ a steamfitter/pipefitter apprentice at a wage for

actual hours worked that is lower than the wage that would be paid at the

minimum wage rate prescribed in the Minimum Wage Order (General) made

under the Labour Standards Code .

Certificate in steamfitter/pipefitter trade through trade qualification

9 The period of employment in the designated trade that is required by paragraph

30(1)(a)(ii)(

B) of the General Regulations for a person who does not hold a certificate of

apprenticeship and is applying for a certificate of qualification in the steamfitter/pipefitter

trade is 10 800 hours.

10 [repealed]

Compliance with identity card requirements of General Regulations

11 For the purposes of

Section 34 of the General Regulations, which requires an apprentice

or journeyperson to keep an identity card in their possession when practising the

designated trade and produce it on request, a person is practising the steamfitter/pipefitter

trade while the person is doing any of the following:

(

a) for an apprentice,

(

i) acquiring practical experience in the trade, or

(ii) learning the skills of the trade during the technical training portion of

apprenticeship training;

(

b) for a journeyperson, performing the duties of the trade as defined in these

regulations or their duties as set out in the General Regulations.

Transition

12 A person who, immediately before the coming into force of these regulations, was an

apprentice in an apprenticeship program under the Steamfitter/Pipefitter Trade

Regulations , N.S. Reg. 240/2011, continues as an apprentice in that apprenticeship

program under these regulations.

Legislative History

Reference Tables

Steamfitter/Pipefitter Trade Regulations

N.S. Reg.

195/2016

Apprenticeship and Trades Qualifications Act

Note: The

information in these tables does not form part of the regulations and is

compiled by the Office of the Registrar of Regulations for reference only.

Source Law

The current consolidation of the Steamfitter/Pipefitter Trade Regulations made

under the Apprenticeship and Trades Qualifications Act includes all of the following regulations:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

195/2016

Apr 1, 2017

date specified

Oct 14, 2016

138/2022

Jul 5, 2022

date specified

Jul 15, 2022

209/2025

Oct 6,

date

specified

Oct

17, 2025

The following regulations are not yet in force and are

not included in the current consolidation:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

*See subsection 3(6) of the Regulations Act for

rules about in force dates of regulations.

Amendments by Provision

ad. = added

am. = amended

fc. = fee change

ra. = reassigned

rep. = repealed

rs . = repealed and substituted

Provision affected

How affected

7 ........................................................

rep. 138/2022

10 ......................................................

rep. 209/2025

Note that changes to headings are not

included in the above table.

Editorial Notes and Corrections:

Note

Effective

date

Repealed and Superseded:

N.S.

Regulation

Title

In force

date

Repealed

date

240/2011

Steamfitter/Pipefitter

Trade Regulations

Jul

19, 2011

Apr 1,

Note: Only

regulations that are specifically repealed and replaced appear in this

table. It may not reflect the entire

history of regulations on this subject matter.