This consolidation is unofficial and is for reference only.

For the official version of the regulations, consult the original documents on file with the Office of the Registrar of Regulations , or refer to the Royal Gazette

Part II .

Regulations are amended frequently.

Please check the list of Regulations by Act to see if there are any recent amendments to these regulations filed with our office that are not yet included in this consolidation.

Although every effort has been made to ensure the accuracy of this electronic version, the Office of the Registrar of Regulations assumes no responsibility for any discrepancies that may have resulted from reformatting.

This electronic version is copyright ©

, Province of Nova Scotia , all rights reserved. It is for your personal use and may not be copied for the purposes of resale in this or any other form.

Marine Fitter Trade Regulations

made under

Section 17A of the

Apprenticeship and Trades Qualifications Act

S.N.S. 2003, c. 1

N.S. Reg. 222/2016 (effective April 1, 2017)

amended to N.S. Reg. 164/2022 (effective July 6, 2022)

Table of Contents

Please note: this table of contents is provided for convenience of reference and does not form part of the regulations.

Click here to go to the text of the regulations .

Citation

Definitions

Term of apprenticeship for marine fitter trade

Wage

schedule for apprentices in marine fitter trade

Certificate in marine fitter trade through trade qualification

Compliance with identity card requirements of General Regulations

Transition

Citation

1 These trade regulations may be cited as the Marine Fitter Trade Regulations .

Definitions

(1) In these regulations,

“Act” means the Apprenticeship and Trades Qualifications Act ;

“General Regulations” means the Apprenticeship and Trades Qualifications Act

General Regulations made under the Act;

“marine fitter trade” means the occupation of a marine fitter, consisting of

outfitting and refitting ships and other marine structures, and includes surveying,

maintaining, repairing, overhauling, altering, fabricating, installing and conducting

alignment tests and trials of marine engineering systems, equipment and

components.

(2) A term defined in the General Regulations has the same meaning when used in

these regulations.

Term of apprenticeship for marine fitter trade

(1) The term of apprenticeship for the marine fitter trade consists of all of the

following:

(a) 7200 documented hours of the combination of practical experience and the

portion of technical training spent learning the skills of the designated trade

as described in clause 26(1A)(

a) of the General Regulations and as

approved by the Director;

(

b) related technical training as described in clause 26(1A)(

b) of the General

Regulations and as approved by the Director;

(

c) a certification examination.

(2) Any probationary period included in a term of apprenticeship for the marine fitter

trade as permitted by subsection 12(2) of the General Regulations must be no

longer than 3 months.

4 [repealed]

Wage

schedule for apprentices in marine fitter trade

(1) Subject to subsection (2) and to subsection 25(3) of the General Regulations, the

minimum wage for each hour worked by a marine fitter apprentice in each portion

of a level of their term of apprenticeship is a percentage of the wage for a marine

fitter journeyperson in the same place of employment, as set out in the following

table:

Wages for Marine Fitter Apprentice

Level of

Apprenticeship

Hours in Portion of Level

of Apprenticeship

Minimum Wage

(% of journeyperson’s wage)

0–900

50%

901–1800

55%

1801–2700

60%

2701–3600

65%

3601–4500

70%

4501–5400

75%

5401–6300

85%

6301–7200

90%

(2) An employer must not employ a marine fitter apprentice at a wage for actual hours

worked that is lower than the wage that would be paid at the minimum wage rate

prescribed in the Minimum Wage Order (General) made under the Labour

Standards Code .

Certificate in marine fitter trade through trade qualification

6 The period of employment in the designated trade that is required by paragraph

30(1)(a)(ii)(

B) of the General Regulations for a person who does not hold a certificate of

apprenticeship and is applying for a certificate of qualification in the marine fitter trade is

10 800 hours.

Compliance with identity card requirements of General Regulations

7 For the purposes of

Section 34 of the General Regulations, which requires an apprentice

or journeyperson to keep their identity card in their possession when practising the

designated trade and produce it on request, a person is practising the marine fitter trade

while the person is doing any of the following:

(

a) for an apprentice,

(

i) acquiring practical experience in the trade, or

(ii) learning the skills of the trade during the technical training portion of

apprenticeship training;

(

b) for a journeyperson, performing the duties of the trade as defined in these

regulations or their duties as set out in the General Regulations.

Transition

8 A person who, immediately before the coming into force of these regulations, was an

apprentice in an apprenticeship program under the trade regulations respecting the

marine fitter trade, N.S. Reg. 170/1991, continues as an apprentice in that apprenticeship

program under these regulations.

Legislative History

Reference Tables

Marine Fitter Trade Regulations

N.S. Reg.

222/2016

Apprenticeship and Trades Qualifications Act

Note: The

information in these tables does not form part of the regulations and is

compiled by the Office of the Registrar of Regulations for reference only.

Source Law

The current consolidation of the Marine Fitter Trade Regulations made

under the Apprenticeship and Trades Qualifications Act includes all of the following regulations:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

222/2016

Apr 1, 2017

date specified

Oct 28, 2016

164/2022

Jul 6,

date

filed

Jul

15, 2022

The following regulations are not yet in force and are

not included in the current consolidation:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

*See subsection 3(6) of the Regulations Act for

rules about in force dates of regulations.

Amendments by Provision

ad. = added

am. = amended

fc. = fee change

ra. = reassigned

rep. = repealed

rs . = repealed and substituted

Provision affected

How affected

4 ........................................................

rep. 164/2022

Note that changes to headings are not

included in the above table.

Editorial Notes and Corrections:

Note

Effective

date

Repealed and Superseded:

N.S.

Regulation

Title

In force

date

Repealed

date

170/1991

Marine

Fitter Trade Regulations

Jul

16, 1991

Apr 1,

Note: Only

regulations that are specifically repealed and replaced appear in this

table. It may not reflect the entire

history of regulations on this subject matter.