This consolidation is unofficial and is for reference only.

For the official version of the regulations, consult the original documents on file with the Office of the Registrar of Regulations , or refer to the Royal Gazette

Part II .

Regulations are amended frequently.

Please check the list of Regulations by Act to see if there are any recent amendments to these regulations filed with our office that are not yet included in this consolidation.

Although every effort has been made to ensure the accuracy of this electronic version, the Office of the Registrar of Regulations assumes no responsibility for any discrepancies that may have resulted from reformatting.

This electronic version is copyright ©

, Province of Nova Scotia , all rights reserved. It is for your personal use and may not be copied for the purposes of resale in this or any other form.

Industrial Coatings Applicator Trade Regulations

made under subsection 17A(1) of the

Apprenticeship and Trades Qualifications Act

S.N.S. 2003, c. 1

N.S. Reg. 114/2025 (effective June 12, 2025)

Table of Contents

Please note: this table of contents is provided for convenience of reference and does not form part of the regulations.

Click here to go to the text of the regulations .

Citation

Definitions

Term of apprenticeship for industrial coatings applicator trade

Industrial coatings applicator certificate through trade qualification

Compliance with identity card requirements of General Regulations

Citation

1 These regulations may be cited as the Industrial Coatings Applicator Trade Regulations .

Definitions

(1) In these regulations,

“Act” means the Apprenticeship and Trades Qualifications Act ;

“industrial coatings applicator trade” means the occupation of applying and

removing protective finishes in commercial, institutional, marine and industrial

settings, including preparing a variety of substrates (metals, concrete, wood and

synthetics) before applying materials such as protective coating systems, coatings,

waterproofing, fireproofing and specialty finishes;

“General Regulations” means the Apprenticeship and Trades Qualifications Act

General Regulations made under the Act.

(2) A term defined in the General Regulations has the same meaning when used in

these regulations.

Term of apprenticeship for industrial coatings applicator trade

(1) The term of apprenticeship for the industrial coatings applicator trade consists of

all of the following:

(a) 5400 documented hours of the combination of practical experience and the

portion of technical training spent learning the skills of the designated trade

as described in clause 26(1A)(

a) of the General Regulations and as

approved by the Director;

(

b) related technical training as described in clause 26(1A)(

b) of the General

Regulations and as approved by the Director;

(

c) a certification examination.

(2) Any probationary period included in a term of apprenticeship for the industrial

coatings applicator trade as permitted by subsection 12(2) of the General

Regulations must be no longer than 3 months.

Industrial coatings applicator certificate through trade qualification

4 The period of employment in the designated trade that is required by paragraph

30(1)(a)(ii)(

B) of the General Regulations for a person who does not hold a certificate of

apprenticeship and is applying for a certificate of qualification in the industrial coatings

applicator trade is 8100 hours.

Compliance with identity card requirements of General Regulations

5 For the purposes of subsections 34(2) and (3) of the General Regulations, which require

an apprentice or journeyperson to keep their identity card in their possession when

practising the designated trade and produce it on request, a person is practising the

industrial coatings applicator trade while the person is doing any of the following:

(

a) for an apprentice,

(

i) acquiring practical experience in the trade, or

(ii) learning the skills of the trade during the technical training portion of

apprenticeship training;

(

b) for a journeyperson, performing the duties of the trade as defined in these

regulations or their duties as set out in the General Regulations.

Legislative History

Reference Tables

Industrial Coatings Applicator Trade Regulations

N.S. Reg.

114/2025

Apprenticeship and Trades Qualifications Act

Note: The

information in these tables does not form part of the regulations and is

compiled by the Office of the Registrar of Regulations for reference only.

Source Law

The current consolidation of the Industrial Coatings Applicator Trade Regulations made

under the Apprenticeship and Trades Qualifications Act includes all of the following regulations:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

114/2025

Jun 12, 2025

date specified

Jun 27, 2025

The following regulations are not

yet in force and are not included in the current consolidation:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

*See subsection 3(6) of the Regulations Act for

rules about in force dates of regulations.

Amendments by Provision

ad. = added

am. = amended

fc. = fee change

ra. = reassigned

rep. = repealed

rs . = repealed and substituted

Provision affected

How affected

..........................................................

Note that changes to headings are not

included in the above table.

Editorial Notes and Corrections

Note

Effective

date

Repealed and Superseded

N.S.

Regulation

Title

In force

date

Repealed

date

Note: Only

regulations that are specifically repealed and replaced appear in this

table. It may not reflect the entire

history of regulations on this subject matter.