Town of Point May Order
N.L.R. 342/1996
Newfoundland and Labrador — Regulations
This is an official version.
Copyright 2006: Queens Printer,
St. John's, Newfoundland and Labrador, Canada
Important Information
(Includes details about the availability of printed and electronic
versions of the Statutes.)
Table of Regulations
Main Site
How current is this regulation?
CONSOLIDATED
NEWFOUNDLAND
AND
LABRADOR
REGULATION 342/96
Town of
Point
May Order
under the
Municipalities Act
(O.C. 96-170)
Amended by:
1996 c25 (Changes communities to towns)
CONSOLIDATED
NEWFOUNDLAND
AND
LABRADOR
REGULATION 342/96
Town of
Point
May Order
under the
Municipalities Act
(O.C. 96-170)
Under the authority of
section 257 of the Municipalities Act
and the Subordinate Legislation Revision and Consolidation Act
, the Lieutenant-Governor in Council makes the following Order.
ORDER
Analysis
Short title
Boundaries
Repeal
Schedule
Short title
This Order may be cited as the Town of Point May Order
CNR 342/96 s1 ; 1996 c25
Back to Top
Boundaries
The boundaries of the Town of Point May are as set out in the Schedule.
CNR 342/96 s2 ; 1996 c25
Back to Top
Repeal
Newfoundland
Regulation 777/78 is repealed.
CNR 342/96 s3
Back to Top
Schedule
Beginning at the point of highest elevation on Middle Ridge;
Then running north 45 west a distance of 2,750 metres, more or less;
Then running south 63 west a distance of 1,750 metres, more or less, to the point of highest elevation on LeBeach Hill;
Then running north 9 east a distance of 1,200 metres, more or less, to a point at the mouth of a small brook which empties into LeBeach Cove;
Then running in a generally southerly direction along the shoreline to Pieduck Point;
Then continuing along the shoreline in a generally southeasterly direction to Flagstaff Point;
Then running north 48 east a distance of 1,800 metres, more or less, to the point of highest elevation of Piercey Hill;
Then running north 38 west a distance of 8,400 metres, more or less;
Then running north 30 east a distance of 5,200 metres, more or less, to the point of beginning.
All bearings being referred to the true meridian.
777/78
Earl G. Tucker, Queen's Printer