This consolidation is unofficial and is for reference only.

For the official version of the regulations, consult the original documents on file with the Office of the Registrar of Regulations , or refer to the Royal Gazette

Part II .

Regulations are amended frequently.

Please check the list of Regulations by Act to see if there are any recent amendments to these regulations filed with our office that are not yet included in this consolidation.

Although every effort has been made to ensure the accuracy of this electronic version, the Office of the Registrar of Regulations assumes no responsibility for any discrepancies that may have resulted from reformatting.

This electronic version is copyright ©

, Province of Nova Scotia , all rights reserved. It is for your personal use and may not be copied for the purposes of resale in this or any other form.

Ironworker (Structural/Ornamental) Trade Regulations

made under

Section 17A of the

Apprenticeship and Trades Qualifications Act

S.N.S. 2003, c. 1

N.S. Reg. 218/2016 (effective April 1, 2017)

amended to N.S. Reg. 160/2022 (effective July 6, 2022)

Table of Contents

Please note: this table of contents is provided for convenience of reference and does not form part of the regulations.

Click here to go to the text of the regulations .

Citation

Definitions

Term of apprenticeship for the ironworker (structural/ornamental) trade

Wage

schedule for apprentices in ironworker (structural/ornamental) trade

Certificate in ironworker (structural/ornamental) trade through trade qualification

Compliance with identity card requirements of General Regulations

Transition

Citation

1 These trade regulations may be cited as the Ironworker (Structural/Ornamental) Trade

Regulations .

Definitions

(1) In these regulations,

“Act” means the Apprenticeship and Trades Qualifications Act ;

“General Regulations” means the Apprenticeship and Trades Qualifications Act

General Regulations made under the Act;

“ironworker (structural/ornamental) trade” means the occupation of an ironworker

(structural/ornamental), consisting of all of the following, but not including

fabricating and assembling materials in an industrial manufacturing plant:

(

i) reading and understanding all shop and field drawings, including

those taken from original architectural and engineered drawings,

(ii) rigging, hoisting and erecting

(

A) curtain walls,

(

B) metal stairways,

(

C) catwalks,

(

D) railings,

(

E) metal doors, and

(

F) pre-engineered steel buildings,

(iii) installing, assembling and reinforcing

(

A) structural or ornamental steel components,

(

B) precast structural concrete,

(

C) ornamental ironwork,

(

D) conveyors, and

(

E) steel pipes for wharves and foundations,

(iv) applying sealants,

(

v) moving and placing machinery and heavy equipment,

(vi) demolishing and salvaging all types of construction.

(2) A term defined in the General Regulations has the same meaning when used in

these regulations.

Term of apprenticeship for the ironworker (structural/ornamental) trade

(1) The term of apprenticeship for the ironworker (structural/ornamental) trade

consists of all of the following:

(a) 5400 documented hours of the combination of practical experience and the

portion of technical training spent learning the skills of the designated trade

as described in clause 26(1A)(

a) of the General Regulations and as

approved by the Director;

(

b) related technical training as described in clause 26(1A)(

b) of the General

Regulations and as approved by the Director;

(

c) a certification examination.

(2) Any probationary period included in a term of apprenticeship for the ironworker

(structural/ornamental) trade as permitted by subsection 12(2) of the General

Regulations must be no longer than 3 months.

4 [repealed]

Wage

schedule for apprentices in ironworker (structural/ornamental) trade

(1) Subject to subsection (2) and to subsection 25(3) of the General Regulations, the

minimum wage for each hour worked by an ironworker (structural/ornamental)

apprentice in each portion of a level in their term of apprenticeship is a percentage

of the wage for an ironworker (structural/ornamental) journeyperson in the same

place of employment, as set out in the following table:

Wages for Ironworker (Structural/Ornamental) Apprentice

Level of

Apprenticeship

Hours in Portion of

Level of Apprenticeship

Minimum Wage

(% of journeyperson’s wage)

0–900

60%

901–1800

65%

1801–2700

70%

2701–3600

75%

3601–4500

80%

4501-5400

90%

(2) An employer must not employ an ironworker (structural/ornamental) apprentice at

a wage for actual hours worked that is lower than the wage that would be paid at

the minimum wage rate prescribed in the Minimum Wage Order (General) made

under the Labour Standards Code .

Certificate in ironworker (structural/ornamental) trade through trade qualification

6 The period of employment in the designated trade that is required by paragraph

30(1)(a)(ii)(

B) of the General Regulations for a person who does not hold a certificate of

apprenticeship and is applying for a certificate of qualification in the ironworker

(structural/ornamental) trade is 8100 hours.

Compliance with identity card requirements of General Regulations

7 For the purposes of

Section 34 of the General Regulations, which requires an apprentice

or journeyperson to keep their identity card in their possession when practising the

designated trade and produce it on request, a person is practising the ironworker

(structural/ornamental) trade while the person is doing any of the following:

(

a) for an apprentice,

(

i) acquiring practical experience in the trade, or

(ii) learning the skills of the trade during the technical training portion of

apprenticeship training;

(

b) for a journeyperson, performing the duties of the trade as defined in these

regulations or their duties as set out in the General Regulations.

Transition

8 A person who, immediately before the coming into force of these regulations, was an

apprentice in an apprenticeship program under the Ironworker (Structural/Ornamental)

Trade Regulations , N.S. Reg. 225/2013, continues as an apprentice in that apprenticeship

program under these regulations.

Legislative History

Reference Tables

Ironworker (Structural/Ornamental) Trade Regulations

N.S. Reg.

218/2016

Apprenticeship and Trades Qualifications Act

Note: The

information in these tables does not form part of the regulations and is

compiled by the Office of the Registrar of Regulations for reference only.

Source Law

The current consolidation of the Ironworker (Structural/Ornamental) Trade Regulations made

under the Apprenticeship and Trades Qualifications Act includes all of the following regulations:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

218/2016

Apr 1, 2017

date specified

Oct 28, 2016

160/2022

Jul 6,

date

filed

Jul

15, 2022

The following regulations are not yet in force and are

not included in the current consolidation:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

*See subsection 3(6) of the Regulations Act for

rules about in force dates of regulations.

Amendments by Provision

ad. = added

am. = amended

fc. = fee change

ra. = reassigned

rep. = repealed

rs . = repealed and substituted

Provision affected

How affected

4 ........................................................

rep. 160/2022

Note that changes to headings are not

included in the above table.

Editorial Notes and Corrections:

Note

Effective

date

Subclauses (

i) to (iv) and the paragraphs under those

subclauses in the definition of “ironworker (structural/ornamental) trade”

that were lettered and numbered as clauses (

a) to (

f) and subclauses in the

original text redesignated as subclauses (

i) to (iv) with corrected paragraph

lettering for the purposes of this consolidation.

Repealed and Superseded:

N.S.

Regulation

Title

In force

date

Repealed

date

225/2013

Ironworker

(Structural/Ornamental) Trade Regulations

Jun

18, 2013

Apr 1,

Note: Only

regulations that are specifically repealed and replaced appear in this

table. It may not reflect the entire

history of regulations on this subject matter.