This consolidation is unofficial and is for reference only.

For the official version of the regulations, consult the original documents on file with the Office of the Registrar of Regulations , or refer to the Royal Gazette

Part II .

Regulations are amended frequently.

Please check the list of Regulations by Act to see if there are any recent amendments to these regulations filed with our office that are not yet included in this consolidation.

Although every effort has been made to ensure the accuracy of this electronic version, the Office of the Registrar of Regulations assumes no responsibility for any discrepancies that may have resulted from reformatting.

This electronic version is copyright ©

, Province of Nova Scotia , all rights reserved. It is for your personal use and may not be copied for the purposes of resale in this or any other form.

Lather (Interior Systems Mechanic) Trade Regulations

made under

Section 17A of the

Apprenticeship and Trades Qualifications Act

S.N.S. 2003, c. 1

N.S. Reg. 220/2016 (effective April 1, 2017)

amended to N.S. Reg. 162/2022 (effective July 6, 2022)

Table of Contents

Please note: this table of contents is provided for convenience of reference and does not form part of the regulations.

Click here to go to the text of the regulations .

Citation

Definitions

Term of apprenticeship for lather (interior systems mechanic) trade

Wage

schedule for apprentices in lather (interior systems mechanic) trade

Certificate in lather (interior systems mechanic) trade through trade qualification

Compliance with identity card requirements of General Regulations

Transition

Citation

1 These trade regulations may be cited as the Lather (Interior Systems Mechanic) Trade

Regulations .

Definitions

(1) In these regulations,

“Act” means the Apprenticeship and Trades Qualifications Act ;

“General Regulations” means the Apprenticeship and Trades Qualifications Act

General Regulations made under the Act;

“lather (interior systems mechanic) trade” means the occupation of a lather

(interior systems mechanic), consisting of constructing, repairing and altering a

building or part of a building, and includes

(

i) preparing wall and ceiling layouts,

(ii) installing metal framing support for walls and ceilings,

(iii) installing drywall,

(iv) installing suspended ceilings,

(

v) finishing walls and ceilings, taping and filling,

(vi) installing and applying insulation and vapour sealants,

(vii) installing acoustical and thermal sealants,

(viii) applying lath for plaster,

(ix) installing raised access floors,

(

x) installing exterior wall panels,

(xi) erecting demountable partitions systems,

(xii) fireproofing.

(2) A term defined in the General Regulations has the same meaning when used in

these regulations.

Term of apprenticeship for lather (interior systems mechanic) trade

(1) The term of apprenticeship for the lather (interior systems mechanic) trade consists

of all of the following:

(a) 5400 documented hours of the combination of practical experience and the

portion of technical training spent learning the skills of the designated trade

as described in clause 26(1A)(

a) of the General Regulations and as

approved by the Director;

(

b) related technical training as described in clause 26(1A)(

b) of the General

Regulations and as approved by the Director;

(

c) a certification examination.

(2) Any probationary period included in a term of apprenticeship for the lather (interior

systems mechanic) trade as permitted by subsection 12(2) of the General

Regulations must be no longer than 3 months.

4 [repealed]

Wage

schedule for apprentices in lather (interior systems mechanic) trade

(1) Subject to subsection (2) and to subsection 25(3) of the General Regulations, the

minimum wage for each hour worked by a lather (interior systems mechanic)

apprentice in each portion of a level of their term of apprenticeship is a percentage

of the wage for a lather (interior systems mechanic) journeyperson in the same

place of employment, as set out in the following table:

Wages for Lather (Interior Systems Mechanic) Apprentice

Level of

Apprenticeship

Hours in Portion of Level

of Apprenticeship

Minimum Wage

(% of journeyperson’s wage)

0–900

50%

901–1800

60%

1801–2700

65%

2701–3600

70%

3601–4500

80%

4501–5400

90%

(2) An employer must not employ a lather (interior systems mechanic) apprentice at a

wage for actual hours worked that is lower than the wage that would be paid at the

minimum wage rate prescribed in the Minimum Wage Order (General) made

under the Labour Standards Code .

Certificate in lather (interior systems mechanic) trade through trade qualification

6 The period of employment in the designated trade that is required by paragraph

30(1)(a)(ii)(

B) of the General Regulations for a person who does not hold a certificate of

apprenticeship and is applying for a certificate of qualification in the lather (interior

systems mechanic) trade is 8100 hours.

Compliance with identity card requirements of General Regulations

7 For the purposes of

Section 34 of the General Regulations, which requires an apprentice

or journeyperson to keep their identity card in their possession when practising the

designated trade and produce it on request, a person is practising the lather (interior

systems mechanic) trade while the person is doing any of the following:

(

a) for an apprentice,

(

i) acquiring practical experience in the trade, or

(ii) learning the skills of the trade during the technical training portion of

apprenticeship training;

(

b) for a journeyperson, performing the duties of the trade as defined in these

regulations or their duties as set out in the General Regulations.

Transition

8 A person who, immediately before the coming into force of these regulations, is an

apprentice in an apprenticeship program under the Lather (Interior Systems Mechanic)

Trade Regulations , N.S. Reg. 104/2000, continues as an apprentice in that apprenticeship

program under these regulations.

Legislative History

Reference Tables

Lather (Interior Systems Mechanic) Trade Regulations

N.S. Reg.

220/2016

Apprenticeship and Trades Qualifications Act

Note: The

information in these tables does not form part of the regulations and is

compiled by the Office of the Registrar of Regulations for reference only.

Source Law

The current consolidation of the Lather (Interior Systems Mechanic) Trade Regulations made

under the Apprenticeship and Trades Qualifications Act includes all of the following regulations:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

220/2016

Apr 1, 2017

date specified

Oct 28, 2016

162/2022

Jul 6,

date

filed

Jul

15, 2022

The following regulations are not yet in force and are

not included in the current consolidation:

N.S.

Regulation

In force

date*

How in force

Royal Gazette

Part II Issue

*See subsection 3(6) of the Regulations Act for

rules about in force dates of regulations.

Amendments by Provision

ad. = added

am. = amended

fc. = fee change

ra. = reassigned

rep. = repealed

rs . = repealed and substituted

Provision affected

How affected

4 ........................................................

rep. 162/2022

Note that changes to headings are not

included in the above table.

Editorial Notes and Corrections:

Note

Effective

date

Repealed and Superseded:

N.S.

Regulation

Title

In force

date

Repealed

date

104/2000

Lather

(Interior Systems Mechanic) Trade Regulations

Jun 1,

Apr 1,

Note: Only

regulations that are specifically repealed and replaced appear in this

table. It may not reflect the entire

history of regulations on this subject matter.