Elevating Devices, Passenger Ropeways and Amusement Rides Permit Regulation (Alta. Reg. 28/2012)

Alta. Reg. 28/2012

Alberta — Regulations

© Published by Alberta King’s Printer Alberta King’s Printer Suite 700, Park Plaza 10611 - 98 Avenue Edmonton, AB T5K 2P7 Phone: 780-427-4952 E-mail: kings-printer@gov.ab.ca Shop on-line at kings-printer.alberta.ca Province of Alberta Office Consolidation Alberta Regulation 28/2012 With amendments up to and including Alberta Regulation 206/2021 Current as of November 17, 2021 SAFETY CODES ACT ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION

Copyright and Permission Statement The Government of Alberta, through the Alberta King’s Printer, holds copyright for all Alberta legislation. Alberta King’s Printer permits any person to reproduce Alberta’s statutes and regulations without seeking permission and without charge, provided due diligence is exercised to ensure the accuracy of the materials produced, and copyright is acknowledged in the following format: © Alberta King’s Printer, 20__.* *The year of first publication of the legal materials is to be completed.

Note All persons making use of this consolidation are reminded that it has no legislative sanction, that amendments have been embodied for convenience of reference only. The official Statutes and Regulations should be consulted for all purposes of interpreting and applying the law.

(Consolidated up to 206/2021) ALBERTA REGULATION 28/2012 Safety Codes Act ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION Table of Contents 1

Definitions 2 Restricted application 3 Permits required 4 Application for permit 5 Application for construction or alteration permit 6 Acceptance inspections 7 Application for operation permit 8 Portable amusement rides 9 Term of operation permit 10 Permit refused or cancelled 11 Identification number 12 Repeal 13 E x p i r y 14 Coming into force

Definitions 1 In this Regulation, (a) “acceptance inspection” means an inspection and series of tests performed by a safety codes officer before a new or altered device is put into operation to provide evidence of the proper installation of the device in accordance with the accepted plans and applicable codes; (b) “Act” means the Safety Codes Act; (c) “amusement ride” means an amusement ride or amusement device within the meaning of (

i) ASTM F2783, Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada,

Section 1 AR 28/2012 ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION 2 (ii) in the case of an inf latable device, ASTM F2374, Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices, and (iii) in the case of a zip line, ASTM F2959, Standard Practice for Aerial Adventure Courses, as in force and as varied under the Amusement Rides Standards Regulation (AR 223/2001); (d) “applicable code” means (

i) with respect to an eleva ting device or passenger ropeway, a code that was in force in Alberta on the date that the owner of the elevating device or passenger ropeway entered into a contract to purchase it, and (ii) with respect to an amusement ride, a code that was in force in Alberta on the date that the design of the amusement ride was completed; (e) “authorized accredited ag ency” means an organization listed in the

Schedule to the Authorized Accredited Agencies Regulation (AR 184/95); (f) “certificate of alteration permit” means a permit to authorize the undertaking of a major alteration of an elevating device, passenger ropeway or fixed amusement ride; (g) “certificate of constructio n permit” means a permit to authorize construction of an elevating device, passenger ropeway or fixed amusement ride; (h) “certificate of operatio n permit” means a permit to authorize the operation of an elevating device, passenger ropeway or amusement ride; (i) “delegated person” means a delegated person as defined in

Schedule 10 to the Government Organization Act who has been delegated by a regulation under

section 2 of that

Schedule with the powers of a safety codes officer under the Safety Codes Act; (j) “elevating device” means, w ith respect to the following Standards or Codes as varied by and declared in force by the Elevating Devices Codes Regulation (AR 62/2009),

Section 1 AR 28/2012 ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION 3 (

i) respecting CAN/CSA B355 Platform Lifts and Stair Lifts for Barrier-free Access, as in force and as varied under the Elevating Devices Codes Regulation (AR 192/2015), a lift as defined in that Standard and as listed in its Clause 1.2, but does not include things to which that Standard is stated not to apply by its Clause 1.3, (ii) respecting CAN/CSA B311 Safety Code for Manlifts as in force and as varied under the Elevating Devices Codes Regulation (AR 192/2015), a manlift (endless belt type, hand-powered counterbalanced type and power type) as defined in that Standard and for which minimum requirements are specified by that Standard, but does not include things to which that Standard is stated not to apply by its Clause 1.2, (iii) respecting ASME A17.1/CSA B44 Safety Code for Elevators and Escalators as in force and as varied under the Elevating Devices Codes Regulation (AR 192/2015), the equipment covered by that Code as stated in its Requirement 1.1.1, but does not include the equipment not covered by that Code as stated by its Requirement 1.1.2, and (iv) respecting CAN/CSA‑ Z185 Safety Code for Personnel Hoists as in force and as varied under the Elevating Devices Codes Regulation (AR 192/2015), the things to which that Standard applies as stated in its Requirement 1.1, but does not include things to which that Standard does not apply as stated by its Requirement 1.3; (k) “major alteration” means an alteration that, in the opinio n of a safety codes officer, significantly changes the structural or operational characteristics of the original design, layout drawings, data or any other information submitted in support of an application for a permit for the elevating device, passenger ropeway or fixed amusement ride; (l) “passenger ropeway” mean s a passenger ropeway or passenger conveyor within the meaning of CSA Z98, Passenger Ropeways and Passenger as in force and as varied under the Passenger Ropeways and Passenger Conveyors Standards Regulation (AR 190/2008); (m) “permit” means (

i) a certificate of alteration permit,

Section 2 AR 28/2012 ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION 4 (ii) a certificate of construction permit, or (iii) a certificate of operation permit; (n) “safety inspection report” means a report prepared by a designated safety codes officer employed by (

i) an authorized accredite d agency that has been authorized to conduct and report on safety inspections for existing elevating devices, or (ii) the Alberta Elevating Devices and Amusement Rides Safety Association. AR 28/2012 s1;206/2021 Restricted application 2 This Regulation applies to (

a) amusement rides that are lo cated in a place to which the general public is allowed access, including but not limited to public events, fairs, carnivals and amusement parks, (

b) elevating devices, and (

c) passenger ropeways. Permits required 3(1) A prospective owner or a prospective owner’s agent must obtain a certificate of construction permit before constructing an elevating device, passenger ropeway or fixed amusement ride.

(2) An owner or an owner’s agent must (

a) obtain a certificate of a lteration permit before undertaking a major alteration of an elevating device, passenger ropeway or fixed amusement ride, or (

b) obtain a certificate of operation permit before operating an elevating device, passenger ropeway or amusement ride. Application for permit 4 An application for a permit under this Regulation must be made to a delegated person (

a) in the form and manner and containing any information required by the delegated person,

Section 5 AR 28/2012 ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION 5 (

b) setting out the information necessary to demonstrate compliance with this Regulation and the applicable codes as required by the delegated person, and (

c) accompanied by the required fee. Application for construction or alteration permit 5(1) The prospective owner of a new elevating device, passenger ropeway or fixed amusement ride, or the prospective owner’s agent, must apply to a delegated person for a certificate of construction permit.

(2) The owner of an elevating device, passenger ropeway or fixed amusement ride, or the owner’s agent, must apply to a delegated person for a certificate of alteration permit.

(3) In addition to the requirements set out in

section 4, an application under this

section must be accompanied by plans that are signed and stamped or sealed by a professional engineer as required by the Engineering and Geoscience Professions Act. AR 28/2012 s5;170/2012 Acceptance inspections 6(1) If a certificate of construction permit or a certificate of alteration permit is required under this Regulation, the elevating device, passenger ropeway or fixed amusement ride that is the subject of the permit may not be put in service until an acceptance inspection is successfully completed.

(2) The owner or the owner’s agent must apply to a delegated person on completion of the construction or major alteration for the acceptance inspection. Application for operation permit 7(1) The owner of an elevating device, passenger ropeway or amusement ride, or the owner’s agent, must apply to a delegated person for a certificate of operation permit in accordance with this

section and

section 4 and include a copy of a safety inspection report if it is required by a delegated person.

(2) An application for a certificate of operation permit for an amusement ride must be accompanied by (

a) a brief description of the ride, the year it was manufactured and its identification number, if previously issued, and (

b) confirmation by the owner that

Section 8 AR 28/2012 ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION 6 (

i) the log book is up to date, (ii) all applicable manuals are readily available at the amusement ride, (iii) the manufacturer’s directives respecting ride safety have been performed, and (iv) the manufacturer’s r ecommendations respecting non-destructive testing have been performed. Portable amusement rides 8(1) In addition to the requirements in sections 4 and 7, (

a) an application for a certif icate of operation permit for a portable amusement ride must be accompanied by (

i) the plans for the original construction of or any major alteration to the portable amusement ride, which must be signed and stamped or sealed by a professional engineer as required by the Engineering and Geoscience Professions Act, (ii) plans that are signed by a person from another jurisdiction who has a professional designation from that jurisdiction equivalent to that of a professional engineer under the Engineering and Geoscience Professions Act, or (iii) plans that are signed by the manufacturer or the manufacturer’s authorized representative, a n d (

b) an owner of a portable amusement ride must file an itinerary with a delegated person at least 21 business days before the operation of the ride, indicating (

i) the type of portable amusement ride, (ii) the portable amusement ride identification number, (iii) each location where the portable amusement ride will be operated, and (iv) the dates when the por table amusement ride will be operated in each location.

(2) The dates referred to in subsection (1)(b)(iv) must not extend beyond December 31 of the calendar year to which the permit applies.

Section 9 AR 28/2012 ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION 7

(3) Any change to the itinerary must be filed with a delegated person at least 7 business days before the date the change takes effect. AR 28/2012 s8;170/2012 Term of operation permit 9(1) Subject to subsection (2), a certificate of operation permit is valid (

a) for 12 months from the date of issue, or (

b) for portable amusement ri des, until December 31 of the issuing year.

(2) A certificate of operation permit may be issued under subsection (1)(

a) for a term of less than 12 months if a delegated person considers it appropriate in the circumstances.

(3) An owner or the owner’s agent who has been issued a certificate of operation permit for an elevating device, passenger ropeway or fixed amusement ride who wishes to obtain a new certificate of operation permit must apply for a new certificate of operation permit in accordance with the requirements of sections 4 and 7 before the date on which a previously issued permit expires.

(4) If an application for a new certificate of operation permit is made before the expiry of the existing permit issued in respect of the same device, the existing permit is valid until the new permit is issued or the application is refused. Permit refused or cancelled 10 A delegated person may refuse to issue a permit or cancel a permit if (

a) incorrect or incomplete i nformation was submitted with the permit application, (

b) required information including but not limited to plans, drawings and specifications for an elevating device, passenger ropeway or amusement ride have not been submitted, (

c) the applicant fails to comply with a requirement of this Regulation, or (

d) in the case of a portable amusement ride, a required or amended itinerary has not been submitted in accordance with

section 8(1)(

b) or (3).

Section 11 AR 28/2012 ELEVATING DEVICES, PASSENGER ROPEWAYS AND AMUSEMENT RIDES PERMIT REGULATION 8 Identification number 11 A delegated person may issue an identification number with respect to an elevating device, passenger ropeway or amusement ride and may require that the owner or the owner’s agent affix the number to the device, ropeway or ride in a manner acceptable to the delegated person. Repeal 12 The Elevating Devices, Passenger Ropeways and Amusement Rides Permit Regulation (AR 286/2002) is repealed.

Expiry 13 For the purpose of ensuring that this Regulation is reviewed for ongoing relevancy and necessity, with the option that it may be repassed in its present or an amended form following a review, this Regulation expires on February 28, 2027. AR 28/2012 s13;16/2017;206/2021 Coming into force 14 This Regulation comes into force on February 28, 2012.

Printed on Recycled Paper *9780779827107*

Document details

Collection	Alberta — Regulations
Citation	Alta. Reg. 28/2012
Type	regulation
Volume / chapter	2012 028
Language	en
Format	pdf
Source	PROVINCIAL
Identifier	d24696058784db33a9dbf3119b5e7d46502d30a5

Source file is stored in the law ingest library (pdf).