Commercial Vehicle Dimension and Weight Regulation (Alta. Reg. 315/2002)

Alta. Reg. 315/2002

Alberta — Regulations

© Published by Alberta King’s Printer Alberta King’s Printer Suite 700, Park Plaza 10611 - 98 Avenue Edmonton, AB T5K 2P7 Phone: 780-427-4952 E-mail: kings-printer@gov.ab.ca Shop on-line at kings-printer.alberta.ca Province of Alberta Office Consolidation Alberta Regulation 315/2002 With amendments up to and including Alberta Regulation 28/2025 Current as of April 1, 2025 TRAFFIC SAFETY ACT COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION

Copyright and Permission Statement The Government of Alberta, through the Alberta King’s Printer, holds copyright for all Alberta legislation. Alberta King’s Printer permits any person to reproduce Alberta’s statutes and regulations without seeking permission and without charge, provided due diligence is exercised to ensure the accuracy of the materials produced, and copyright is acknowledged in the following format: © Alberta King’s Printer, 20__.* *The year of first publication of the legal materials is to be completed.

Note All persons making use of this consolidation are reminded that it has no legislative sanction, that amendments have been embodied for convenience of reference only. The official Statutes and Regulations should be consulted for all purposes of interpreting and applying the law.

(Consolidated up to 28/2025) ALBERTA REGULATION 315/2002 Traffic Safety Act COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION Table of Contents 1

Definitions 2 Application and exemption 3 Prohibitions

Part 1 Commercial Vehicle Dimensions 4 Maximum dimensions 5 Outside projections 6 Width exceptions for farm equipment 7 General width exceptions 8 Width and height exceptions

Part 2 Commercial Vehicle Weights 9 Maximum weight

Part 3 Special Conditions 1 0 Emergency exceptions 1 1 Bridges 1 2 Road bans 1 3 Licence of occupation road

Part 4 Overdimensional and Overweight Commercial Vehicles 1 4 Definition 1 5 Overdimensional safety requirements 1 6 Escort vehicles 16.1 Dimensional sign requirements 1 7 General provisions 1 8 Overweight permits

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 2

Part 5 Permit Fees 1 9 Permit fees

Part 6 Miscellaneous 2 1 Offences 2 2 Repeal 2 3 E x p i r y 2 4 Coming into force Schedules

Definitions 1 In this Regulation, (a) “A-hitch” means a trailer converter dolly or a turntable assembly that is towed from a single hitch located on the centre line of the towing vehicle; (b) “A-train” means a combinatio n of vehicles consisting of a truck tractor, a semi-trailer attached to the rear end of the truck tractor and either (

i) a full trailer attached to the rear end of the lead semi- trailer by an A-hitch, (ii) a pony trailer attached to the rear end of the lead semi-trailer, (iii) a pole trailer attached t o the rear end of the lead semi-trailer, or (iv) a trailer converter dolly attached to the rear end of the lead semi-trailer; (c) “Act” means the Traffic Safety Act; (d) “advance warning triangl e” means an emergency warning device that complies with the Society of Automotive Engineers Standard J774, as amended from time to time; (d.01) “auxiliary equipment” mea ns equipment, machinery or a device that (

i) is permanently mounted at the front or sides of a vehicle,

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 3 (ii) is non-load bearing, and (iii) is not designed, intended, or used to increase the load carrying capacity of the vehicle; (d.1) “axle group” means a single axle, a quantum axle group, a tandem axle group, a tridem axle group, a tridem drive axle group or a twin steer axle group; (e) “axle spread” means the long itudinal distance between the centres of the outside axles of an axle group; (f) “B-train” means a combinatio n of vehicles consisting of a truck tractor, a semi-trailer attached to the truck tractor and a semi-trailer attached to the lead semi-trailer by means of a fifth wheel mounted no more than 0.3 metres behind the centre of the last axle on the lead semi-trailer; (f.1) “ball hitch” means a coupling device that is mounted on the rear of a vehicle consisting of mounting brackets and a ball-shaped hitching mechanism that couples or connects to a latching mechanism on the other vehicle or component for the purpose of supporting or towing the vehicle or component; (g) “bed truck” means a truck (

i) that is equipped with a cargo carrying deck, (ii) that is equipped with a win ch for self loading that has a pulling capacity of at least 18 000 kilograms, and (iii) that may be coupled to a semi-trailer by means of a fifth wheel; (h) “box length” means, with respect to a combination of vehicles, the longitudinal dimension from the forwardmost part of the lead trailer or its load, whichever is further forward, to the rearmost part of the last trailer or its load, whichever is the greatest distance from the front of the lead trailer, exclusive of any extension in the dimension caused by auxiliary equipment at the front of the lead trailer that is not designed for the transportation of goods; (i) “carrying axle” means any ax le that is not a steering axle; (j) “C-hitch” means a traile r converter dolly that is (

i) equipped with a frame that is rigid in the horizontal plane, and

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 4 (ii) connected with 2 hitches located in a parallel line on the towing unit so as to preclude any rotation in the horizontal plane about the hitch points; (k) “C-train” means a combination of vehicles consisting of a truck tractor, a semi-trailer attached to the truck tractor and a semi-trailer attached to the rear end of the lead semi-trailer by means of a C-hitch; (

l) repealed AR 117/2018 s2; (l.1) “daytime” means the period commencing one hour before sunrise and ending one hour after the following sunset; (m) “Director” means the Director of Permitting and Approvals of the Department of Transportation and Economic Corridors; (n) “drawbar” means a struc tural member attached to the frame of a turntable assembly, pony trailer or trailer converter dolly, and includes a device for the purpose of coupling with a trailer hitch or fifth wheel; (o) “drawbar length” means (

i) the longitudinal distance from the centre of the hole for the kingpin in the fifth wheel of a trailer converter dolly, or (ii) the axle steering pivo t centre for a turntable to the centre of the hitching device on the towing vehicle; (o.1) “drop frame” means a truc k frame extension that extends the frame behind and below the centre of the rearmost axle of a truck tractor for the purpose of mounting a fifth wheel; (p) “effective rear overhang” means the longitudinal distance from the turn centre of the rear axle group of a commercial vehicle to the rearmost point of (

i) the vehicle, or (ii) the load on the vehicle, whichever is the greater distance; (q) “farm equipment” means equipment designed and intended for use in farming operations, but does not include

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 5 (

i) a truck, trailer or semi-trailer, (ii) farm equipment that is lo aded on a truck, trailer or semi-trailer, or (iii) farm equipment that is towing equipment other than another piece of farm equipment; (r) “fifth wheel” m eans a coupling device that is mounted on the vehicle chassis and that consists of a skid plate, associated mounting brackets and latching mechanism that couples or connects to a kingpin located on the other vehicle or component, for the purpose of supporting or towing a semi-trailer; (s) “flashing lamp” means a flashing lamp as defined in the Vehicle Equipment Regulation; (t) “full trailer” means a trailer (

i) that has an axle group located at or near its front end and at or near its rear end, and (ii) that primarily carries the entire weight of the trailer and any load on the trailer on its own axles, and includes a semi-trailer th at is converted to a full trailer by means of a trailer converter dolly; (u) “gross weight” means (

i) in respect of a single ax le of a vehicle, the total weight that a single axle transmits to a highway; (ii) in respect of an axle group of a vehicle, the sum of the weights transmitted to a highway by all of the axles within the axle group; (iii) in respect of a tire of a vehicle, the total weight that the tire transmits to a highway; (iv) in respect of a vehicle, t he total weight of a vehicle or combination of vehicles calculated as the sum of the weights transmitted to a highway through each of the axles; (v) “hitch offset” means the longitudinal distance from the rear turn centre of a semi-trailer, truck or full trailer to the centre of the hitching mechanism provided for towing a trailer behind the semi-trailer, truck or full trailer;

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 6 (v.1) “industrial park” means an area designated as an industr ial park within a municipality; (w) “interaxle spacing” means the longitudinal distance separating two axles or axle groups, or a steering axle and an axle group, as calculated from the centres of the two adjacent axles; (x) “intercity bus” means a bus designed to carry more than 15 passengers, including the driver, and equipped with facilities to allow extended travel without stopping; (y) “jeep logger” means a combination of vehicles (

i) consisting of a truck tractor, a semi-trailer and a pole trailer, and (ii) used for hauling tree-len gth logs that are supported on two bunks located (

A) near the middle of the semi-trailer, and (

B) directly over the axles of the pole trailer; (z) “kingpin setback” means the longitudinal distance from the centre of the kingpin to the front of the semi-trailer or the load, whichever is further forward, excluding any auxiliary equipment attached to the front of the semi- trailer that is not designed for the transportation of goods; (aa) “lift axle” means an axle of a vehicle that is constructed so that the operator of the vehicle may lift or otherwise remove the wheels located on that axle from contact with the highway without removing the wheel from the axle or the axle from the vehicle; (aa.1) “load overhang” means the longitudinal distance from th e rearmost point of a vehicle excluding any load to the rearmost point of the vehicle including any load; (bb) repealed AR 125/2020 s2; (cc) “multi-lane highway” mean s a highway having more than one traffic lane for vehicles travelling in the same direction; (cc.1) “night time” means the pe riod commencing one hour after sunset and ending one hour before the following sunrise; (dd) “overdimensional permit” means a permit issued under

section 62(1)(a)(ii) of the Act;

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 7 (ee) “overweight permit” means a permit issued under

section 62(1)(b)(iv) of the Act; (ff) “percentage axle weight” means the percentage that is applied to the maximum weights of the carrying axles or axle groups of a vehicle, as established by

section 9, to determine the weight that the carrying axles or axle groups may transmit to a highway; (gg) “picker truck” means a truck (

i) that is equipped with a boom crane for self loading that has a lifting capacity of at least 7000 kilograms, and (ii) that may be coupled to a semi-trailer by means of a fifth wheel; (gg.01) “pintle hitch” means a tow ring configuration that is used to secure a hook or a ball combination for the purpose of connecting a power unit to a trailer; (gg.1) “pole trailer” means a tr ailer that does not have more than one axle group and that (

i) is drawn by a towing vehicle to which it is attached by a variable reach pole, and (ii) is used to tr ansport a load that is capable of sustaining itself as a beam between a support located on the towing vehicle and a second support located on the trailer; (hh) “pony trailer” means a trailer that is (

i) equipped with a drawbar that is rigidly attached to the structure of the trailer, and (ii) designed and used so that most of its weight and load is carried on its own axles, and includes a trailer that is commonly known as a stiff pole pup trailer; (ii) repealed AR 125/2020 s2; (jj) “quantum axle group” means a carrying axle group, other than a single, tandem, tridem or tridem drive axle group; (jj.1) “rear of the vehicle” mean s the rear extremity as defined in Canadian Motor Vehicle Safety Standard 223, exclusive of any aerodynamic devices;

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 8 (jj.2) “recreational travel tra iler” means a trailer that is primarily designed to provide temporary living quarters for recreational camping, travel or seasonal use; (kk) “road authority” means (

i) the Minister of Transportation and Economic Corridors, in the case of (

A) a highway under the Minister’s direction, control and management, or (

B) a highway located in an improvement district; (ii) a municipality, other than a special area, in the case of a highway under the municipality’s direction, control and management; (iii) the Minister of Municipa l Affairs, in the case of a highway located in a special area that is not otherwise under the direction, control and management of the Minister of Transportation and Economic Corridors; (ll) repealed AR 148/2022 s2; (mm) “self-propelled equipm ent” means machinery or equipment that (

i) moves under its own power, (ii) is not capable of exceedi ng a speed of 40 kilometres per hour, and (iii) does not carry any load; (mm.1) “self steering axle” me ans an assembly of two or more wheels whose centres are in one transverse vertical plane and whose wheels can articulate in response to forces generated between the tires and the road or through mechanisms and linkages that operate independently of the driver; (nn) “semi-trailer” m eans a trailer that (

i) has axles only at or near its rear end; (ii) while being towed, is su pported at its front end by the truck tractor or the immediately preceding trailer;

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 9 (iii) when connected to the truck tractor or preceding trailer, is connected by means of a kingpin and a fifth wheel; (oo) “single axle” means (

i) any individual axle, or (ii) any combination of 2 axles whose centres are less than one metre apart; (oo.1) “single steer” means an axle group consisting of one steering axle; (pp) “statutory holiday” means (

i) New Year’s Day, Family Day, Good Friday, Victoria Day, Canada Day, Labour Day, Thanksgiving Day, Remembrance Day and Christmas Day, and (ii) December 26, or when tha t day falls on a Sunday or a Monday, then December 27; (qq) “steering axle” means the articulated axle of a commercial vehicle that can be controlled by the operator of the vehicle for the purpose of steering the vehicle; (qq.1) “stinger-steer auto carri er” means a combination of vehicles designed and intended to carry automobiles or boats consisting of a truck tractor and semi-trailer where the fifth wheel is located on a drop frame behind and below the centre of the rearmost axle of the power unit; (rr) “tandem axle group” means an axle group consisting of any 2 consecutive axles on a vehicle where (

i) the axles have an axle spread of not less than 1.0 metre and not greater than 1.85 metres, or (ii) in the case of a tra iler manufactured before November 15, 1988, the axles have an axle spread of not less than 1.0 metre and not greater than 2.4 metres, but does not include a lift axle in the down position or a self steering axle; (rr.1) “toter-home” means a combination of a truck tractor, equipped with living accommodations, coupled to a semi-trailer by means of a fifth wheel, used to transport event-specific equipment such as race cars, motorcycles, snowmobiles and wagons along with related items to

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 10 racing events, trade shows, carnivals and rodeos, but not goods for delivery or unrelated cargo other than personal items; (rr.2) “tow dolly” m eans a coupling device that is mounted on the rear of a vehicle consisting of a tow bar, associated mounting brackets and a latching mechanism that couples or connects to the front axle of a vehicle in tow and is capable of lifting the front axle off the ground, for the purpose of supporting or towing the vehicle; (ss) “track width” means the overall width of an axle measured from the outside of the outside tire located on one side of the vehicle to the outside of the outside tire located on that axle on the other side of the vehicle at any point above the lowest point of the rim; (tt) “trailer” means a vehicle without motive power that is designed to be towed by another vehicle; (uu) “trailer converter dolly” me ans a vehicle that consists of one or more axles, a fifth wheel and a drawbar, and is used to convert a semi-trailer to a full trailer; (vv) “trailer length” means the longitudinal distance, (

i) in the case of a pony t railer, from the front of the drawbar of the trailer to the rearmost point of (

A) the pony trailer, or (

B) a load carried on the pony trailer, whichever is the greater distance, excluding any extension of that distance caused by auxiliary equipment at the front of the pony trailer that is not designed for the transportation of goods, (ii) in the case of a full trailer, from the front of the cargo

section or the load carried on the full trailer, whichever is further forward, to the rearmost point of (

A) the full trailer, or (

B) a load carried on the full trailer, whichever is the greater distance, excluding any extension of that distance caused by auxiliary equipment at the front that is not designed for the transportation of goods, or

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 11 (iii) in the case of a semi-t railer, from the front of the cargo

section or the load carried on the semi-trailer, whichever is further forward, to the rearmost point of (

A) the semi-trailer, or (

B) a load carried on the semi-trailer, whichever is the greater distance, excluding any extension of that distance caused by auxiliary equipment at the front that is not designed for the transportation of goods; (ww) “trailer wheelbase” means the longitudinal distance from the centre of the kingpin on a semi-trailer, the centre of the turntable on a full trailer or the centre of the hitch device on a pony trailer, to the trailer turn centre; (xx) “tridem axle group” means an axle group, on a trailer, consisting of any 3 consecutive axles of a vehicle where the axles are evenly spaced over a distance of not less than 2.4 metres and not greater than 3.7 metres, but does not include a lift axle in the down position or a self steering axle; (xx.1) “tridem drive axle group ” means a driving axle group, on a truck or truck tractor, consisting of 3 driving axles (

i) equally spaced, (ii) with a track width of between 2.5 metres and 2.6 metres, (iii) on a common suspension designed to equalize the weight between the axles, (iv) with a minimum of 12 tires, and (

v) with all tires of the same size and a minimum width of 255 millimetres, as determined by the manufacturer’s width shown on the tire, but does not include a lift ax le or a self steering axle; (yy) “truck” means a motor vehicle designed and intended for the transport of goods or carrying of loads; (zz) “truck tractor” means a tr uck that may be coupled to a semi-trailer by means of a fifth wheel, but does not include a bed truck, picker truck or winch truck;

Section 1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 12 (aaa) “truck tractor wheelbase” means the longitudinal distance from the centre of the steering axle or twin steer axle group located on a truck tractor to the turn centre of the drive axle group located on the truck tractor; (bbb) “turn centre” means the geometric centre of (

i) the axle group on a truck, truck tractor, semi-trailer or pony trailer, or (ii) the rear axle gro up on a full trailer; (ccc) “twin steer” means an axl e group consisting of 2 steering axles where the axles are spread between 1.0 metre and 1.85 metres; (ddd) “2-lane highway” means a highway with one traffic lane on each side of the centre line for vehicles travelling in opposite directions; (eee) “warning flag” means a rect angular flag of red or orange colour with sides that are at least 400 millimetres in length; (fff) “warning light” means a lig ht showing amber to the front and red to the rear and that is visible at a distance of 150 metres in normal darkness; (fff.1) “weight-distributing hitch” means a coupling device that is mounted on the rear of a vehicle consisting of a ball hitch in combination with associated mounting brackets, spring bars and a sway control mechanism that couples or connects to a hitching mechanism on the other vehicle or component for the purpose of supporting or towing the vehicle or component; (fff.2) “wide-base single tir e” means a tire not used on a steering axle or a tridem drive axle and having a nominal width of at least 445 millimetres and a nominal ratio of sidewall height to width of 55 or less, as indicated by the manufacturer and shown on the tire; (ggg) “winch truck” means a truck that (

i) is equipped with a winch for self loading that has a pulling capacity of at least 18 000 kilograms, and (ii) may be coupled to a semi-t railer by means of a fifth wheel. AR 315/2002 s1;100/2004;105/2005;35/2007;68/2008;72/2008; 47/2014;117/2018;147/2019;125/2020;148/2022;216/2022

Section 2 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 13 Application and exemption 2(1) This Regulation applies only to commercial vehicles.

(2) A commercial vehicle operated by or on behalf of a road authority for snow and ice control on a highway is exempt from this Regulation, other than

section 11(2), when the vehicle is operated within the boundaries of the area under the jurisdiction of that road authority. Prohibitions 3 Subject to

section 62 of the Act, no person shall operate a commercial vehicle on a highway unless the vehicle is one of the following types of vehicles or combination of vehicles: (

a) a combination of a truck tractor and a semi-trailer; (

b) a combination of a bed truck, picker truck or winch truck and a semi-trailer; (

c) a combination of a truck and a pony trailer; (

d) a combination of a truck and a full trailer; (

e) A-train; (

f) B-train; (

g) bed truck; (

h) bus; (

i) C-train; (

j) farm equipment; (

k) grader, snow plow, road construction equipment or maintenance equipment; (

l) jeep logger; (

m) picker truck; (

n) t r u c k ; (

o) self-propelled equipment; (o.1) stinger-steer auto carrier; (o.2) toter-home; (

p) winch truck;

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 14 (

q) a truck towing farm equipment. AR 315/2002 s2;147/2019;125/2020

Part 1 Commercial Vehicle Dimensions Maximum dimensions 4(1) Subject to

section 62 of the Act, no person shall (

a) operate a truck tractor, ot her than a truck tractor with a tridem drive axle group, on a highway when (

i) the truck tractor, inclu ding any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck tractor, including any load, is greater than 4.15 metres from the surface of the highway, or (iii) the wheelbase of the truc k tractor exceeds 6.2 metres; (a.1) operate a truck tractor w ith a tridem drive axle group on a highway when (

i) the truck tractor, inclu ding any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck tractor, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the wheelbase of the truc k tractor is less than 6.6 metres or greater than 6.8 metres, or (iv) the tridem drive axle spre ad is less than 2.4 metres or greater than 2.8 metres; (

b) operate a truck or bus, other than an intercity bus, a sin gle steer truck with a tridem drive axle group or a twin steer truck with a tridem drive axle group, on a highway when (

i) the truck or bus, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck or bus, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the overall length of the truck or bus, including any load, exceeds 12.5 metres, or

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 15 (iv) in the case of a truck manufactured after September 1, 1993, (

A) the hitch offset rearward on the truck exceeds 1.8 metres, or (

B) the effective rear overhang exceeds 4 metres; (b.1) operate a single steer truck with a tridem drive axle gr oup on a highway when (

i) the truck, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the overall length of th e truck, including any load, exceeds 12.5 metres, (iv) the wheelbase of the truck is less than 6.6 metres, (

v) the tridem drive axle spread is less than 2.4 metres or greater than 2.8 metres, (vi) the hitch offset e xceeds 2.6 metres, or (vii) the effective rear overhang exceeds 4.0 metres; (b.2) operate a twin steer truck with a tridem drive axle group on a highway when (

i) the truck, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the overall length of th e truck, including any load, exceeds 12.5 metres, (iv) the interaxle spacing from the twin steer axle to an adjacent axle group is less than 5.5 metres, (

v) the hitch offset exceeds 2.6 metres, (v.1) the effective rear ove rhang exceeds 4.0 metres, or (vi) the wheelbase of the truck is less than the dimensions, or the tridem drive axle spread is less

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 16 than or exceeds the limits, provided in the following table: (

c) operate a semi-trailer on a highway when (

i) the semi-trailer, including any load, exceeds 2.6 metres in width, (ii) in the case of a semi-trailer with axles equipped with wide-base single tires that was manufactured before 2010, the track width is less than 2.3 metres or exceeds 2.6 metres, (ii.1) in the case of a semi-trailer with axles equipped with wide-base single tires that was manufactured in 2010 or later, the track width is less than 2.45 metres or exceeds 2.6 metres, (ii.2) in the case of a semi-t railer with axles that are not equipped with wide-base single tires, (

A) the track width is less than 2.5 metres or exceeds 2.6 metres, or (

B) where the semi-trailer is equipped with a tandem axle that is converted to a tridem axle, the track width is less than 2.4 metres or exceeds 2.6 metres, (iii) the height of the highest point of the semi-trailer, including any load, is greater than 4.15 metres from the surface of the highway, (iv) the trailer length of t he semi-trailer exceeds 16.2 metres, (

v) the kingpin setback exceeds a 2-metre radius, (vi) the wheelbase of the se mi-trailer is less than 6.25 metres or greater than 12.5 metres, (vii) the semi-trailer has more than one axle group, or (viii) the effective rear overh ang exceeds 35% of the trailer wheelbase; Tridem Drive Axle Spread (metres) Minimum Wheelbase (metres) Maximum Tridem Drive Axle Weight (kg) 2.4 to less than 2.8 7.70 23 000 2.8 to less than 3.05 7.80 23 000 3.05 to 3.1 7.90 24 000

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 17 (

d) operate a full trailer on a highway when (

i) the full trailer, incl uding any load, exceeds 2.6 metres in width, (ii) in the case of a full tra iler with axles equipped with wide-base single tires that was manufactured before 2010, the track width is less than 2.3 metres or exceeds 2.6 metres, (ii.1) in the case of a full tr ailer with axles equipped with wide-base single tires that was manufactured in 2010 or later, the track width is less than 2.45 metres or exceeds 2.6 metres, (ii.2) in the case of a full tr ailer with axles that are not equipped with wide-base single tires, the track width is less than 2.5 metres or exceeds 2.6 metres, (iii) the height of the highest point of the full trailer, including any load, is greater than 4.15 metres from the surface of the highway, (iv) the trailer length of t he full trailer exceeds 12.5 metres, (

v) the wheelbase of the fu ll trailer is less than 6.25 metres, (vi) the full trailer is equip ped with a tridem axle group, or (vii) the full trailer has (

A) more than 2 single axles, (

B) more than 2 axle groups, (

C) a combination of 2 or more single axles and an axle group, or (

D) a combination of a single axle and 2 or more axle groups; (

e) operate a pony trailer on a highway when (

i) the pony trailer, including any load, exceeds 2.6 metres in width, (ii) in the case of a pony trailer with a gross vehicle weight rating of 10 000 kilograms or more and with axles equipped with wide-base single tires that was

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 18 manufactured after September 1, 1993 but before 2010, the track width is less than 2.3 metres or exceeds 2.6 metres, (ii.1) in the case of a pony trailer with a gross vehicle weight rating of 10 000 kilograms or more and with axles equipped with wide-base single tires that was manufactured in 2010 or later, the track width is less than 2.45 metres or exceeds 2.6 metres, (ii.2) in the case of a pony trailer with a gross vehicle weight rating of 10 000 kilograms or more and with axles that are not equipped with wide-base single tires that was manufactured after September 1, 1993, (

A) the track width is less than 2.5 metres or exceeds 2.6 metres, or (

B) where the pony trailer is equipped with a tandem axle that is converted to a tridem axle, the track width is less than 2.4 metres or exceeds 2.6 metres, (iii) the height of the highest point of the pony trailer, including any load, is greater than 4.15 metres from the surface of the highway, (iv) the trailer length of t he pony trailer exceeds 12.5 metres, (

v) in the case of a pony t railer manufactured after September 1, 1993 with a gross vehicle weight rating of 10 000 kilograms or more, the wheelbase of the pony trailer is less than 6.25 metres, (vi) the tridem axle spread of the pony trailer is less than 2.4 metres or greater than 2.5 metres, or (vii) the pony trailer has more than one axle group; (

f) operate an intercity bus on a highway when (

i) the intercity bus, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the intercity bus, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the overall length of the intercity bus exceeds 14 metres, or

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 19 (iv) the effective rear overhang exceeds 4 metres; (

g) operate a combination of a truck tractor, a bed truck, a picker truck or a winch truck and a semi-trailer, other than a truck tractor, a bed truck, a picker truck or a winch truck with a tridem drive axle group, on a highway when the overall length of the combination, including any load, exceeds 23 metres; (g.1) operate a combination of a truck tractor, a bed truck, a picker truck or a winch truck with a tridem drive axle group and a semi-trailer on a highway when the overall length of the combination, including any load, exceeds 23.5 metres; (

h) operate a combination of a truck and pony trailer, other than a single steer truck with a tridem drive axle group or a twin steer truck with a tridem drive axle group, on a highway when (

i) the box length exceeds 20 metres, (ii) the overall length of the combination, including any load, exceeds 23 metres, or (iii) the effective rear ove rhang of the pony trailer exceeds 4 metres; (h.1) operate a combination of a single steer truck with a tri dem drive axle group and pony trailer on a highway when (

i) the box length exceeds 20.5 metres, (ii) the overall length of the combination, including any load, exceeds 23 metres, or (iii) the effective rear ove rhang of the pony trailer exceeds 4 metres; (h.2) operate a combination of a twin steer truck with a tridem drive axle group and pony trailer on a highway when (

i) the box length exceeds 21 metres, (ii) the overall length of the combination, including any load, exceeds 23 metres, or (iii) the effective rear ove rhang of the pony trailer exceeds 4 metres; (

i) operate a combination of a t ruck and full trailer, other than a single steer truck tractor with a tridem drive axle group

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 20 or a twin steer truck with a tridem drive axle group, on a highway when (

i) the box length exceeds 20 metres, (ii) the overall length of the combination, including any load, exceeds 23 metres, or (iii) the full trailer is equipped with a C-hitch; (i.1) operate a combination of a single steer truck with a tri dem drive axle group and full trailer on a highway when (

i) the box length exceeds 20.5 metres, (ii) the overall length of the combination, including any load, exceeds 25 metres, or (iii) the full trailer is equipped with a C-hitch; (i.2) operate a combination of a twin steer truck with a tridem drive axle group and full trailer on a highway when (

i) the box length exceeds 21 metres, (ii) the overall length of the combination, including any load, exceeds 25 metres, or (iii) the full trailer is equipped with a C-hitch; (

j) operate an A-train on a highway when (

i) the box length exceeds 20 metres, (ii) the overall length of the A-train, including any load, exceeds 26 metres, or (iii) the hitch offset is greater than 1.8 metres; (

k) operate a B-train on a highway when (

i) the box length exceeds 20 metres, (ii) the overall length of the B-train, including any load, exceeds 27.5 metres, (iii) the B-train has a tridem axle group with an axle spread that exceeds 3.1 metres, or (iv) in the case of a B-train manufactured after January 1, 1993, the sum of the two trailer wheelbases exceeds 17 metres;

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 21 (

l) operate a C-train on a highway when (

i) the box length exceeds 20 metres, (ii) the overall length of the C-train, including any load, exceeds 26 metres, (iii) the hitch offset of a tra iler is greater than 1.8 metres, or (iv) in the case of a C-hitch manufactured after September 23, 1993, the drawbar length of the C-hitch exceeds 2 metres; (

m) operate farm equipment on a highway when (

i) the farm equipment, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the farm equipment, including any load, is greater than 5 metres from the surface of the highway, or (iii) the overall length of the farm equipment, including any load, exceeds 30.5 metres; (

n) operate a bed truck, picker truck or winch truck, other than a bed truck, picker truck or winch truck with a tridem drive axle group, on a highway when (

i) the truck, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the overall length of th e truck, including any load, exceeds 12.5 metres, or (iv) in the case of a truck manufactured after September 1, 1993, (

A) the hitch offset rearward of the truck exceeds 1.8 metres, or (

B) the effective rear overhang of the truck exceeds 4 metres; (n.1) operate a single steer bed truck, picker truck or winch truck, with a tridem drive axle group, on a highway when

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 22 (

i) the truck, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the overall length of th e truck, including any load, exceeds 12.5 metres, (iv) the hitch offset rearwa rd of the truck exceeds 2.6 metres, (

v) the effective rear overhang of the truck exceeds 4 metres, or (vi) the wheelbase is less than 6.6 metres and the tridem drive axle spread is less than 2.4 metres or greater than 2.8 metres; (n.2) operate a twin steer bed tru ck, picker truck or winch truck with a tridem drive axle group, on a highway when (

i) the truck, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the truck, including any load, is greater than 4.15 metres from the surface of the highway, (iii) the overall length of th e truck, including any load, exceeds 12.5 metres, (iv) the interaxle spacing from the twin steer axle to an adjacent axle group is less than 5.5 metres, (

v) the hitch offset e xceeds 2.6 metres, (vi) the effective rear overh ang of the truck exceeds 4 metres, or (vii) the wheelbase of the truck is less than the dimensions, or the tridem drive axle spread is less than or exceeds the limits, provided in the following table: Tridem Drive Axle Spread (metres) Minimum Wheelbase (metres) Maximum Tridem Drive Axle Weight (kg) 2.4 to less than 2.8 7.70 23 000 2.8 to less than 3.05 7.80 23 000 3.05 to 3.1 7.90 24 000

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 23 (

o) operate a jeep logger on a highway when (

i) the height of the highest point of the jeep logger, including any load, is greater than 4.15 metres from the surface of the highway, (ii) the overall length of the jeep logger, including any load, exceeds 25 metres, or (iii) the effective rear overhang of the jeep logger, including any load, exceeds 4 metres; (

p) operate self-propelled equipment on a highway when (

i) the self-propelled equipment, including any load, exceeds 3.2 metres in width, (ii) the height of the highest point of the self-propelled equipment, including any load, is greater than 4.15 metres from the surface of the highway, or (iii) the overall length of th e self-propelled equipment, including any load, exceeds 14 metres; (

q) operate a snow plow, grader, road construction equipment or maintenance equipment on a highway when (

i) the vehicle, including any load, exceeds 2.6 metres in width, (ii) the height of the highest point of the vehicle, including any load, is greater than 4.15 metres from the surface of the highway, or (iii) the overall length of the vehicle, including any load, exceeds 14 metres; (

r) operate a truck towing farm equipment, other than a grain auger, on a highway when (

i) the height of the highest point of the farm equipment, including any load, is greater than 5 metres from the surface of the highway, or (ii) the overall length of the combination exceeds 23 metres; (

s) operate a truck or farm equipment towing a grain auger on a highway when

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 24 (

i) the height of the highest point of the farm equipment, including any load, is greater than 5 metres from the surface of the highway, or (ii) the overall length of the combination exceeds (A) 30.5 metres during daytime, or (B) 23 metres during nigh ttime or when visibility is less than 150 metres; (

t) transport farm equipment lo aded on a trailer on a highway when (

i) the height of the highest point of the farm equipment, including any load, is greater than 5 metres from the surface of the highway, (ii) the overall width exceeds 2.6 metres, or (iii) the overall length of the combination exceeds 23 metres.

(2) Notwithstanding subsection (1), and subject to

section 62 of the Act, a person may (

a) operate a truck tractor in a tractor semi-trailer configuration, other than a truck tractor with a tridem drive axle group, with a wheelbase up to 7.2 metres on a highway when the wheelbase of the semi-trailer is reduced in accordance with the following table: Tractor wheelbase Semi-trailer wheelbase Up to 6.3 metres 12.5 metres Up to 6.4 metres 12.4 metres Up to 6.5 metres 12.3 metres Up to 6.6 metres 12.3 metres Up to 6.7 metres 12.2 metres Up to 6.8 metres 12.1 metres Up to 6.9 metres 12.1 metres Up to 7.0 metres 12.0 metres Up to 7.1 metres 11.9 metres Up to 7.2 metres 11.9 metres (

b) operate a truck tractor in a B-train configuration, other than a truck tractor with a tridem drive axle group, with a wheelbase up to 6.8 metres on a highway when the sum of the wheelbases of the semi-trailers are reduced in accordance with the following table:

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 25 Tractor wheelbase Sum of Semi-trailer wheelbase Up to 6.3 metres 16.6 metres Up to 6.4 metres 16.5 metres Up to 6.5 metres 16.4 metres Up to 6.6 metres 16.3 metres Up to 6.7 metres 16.2 metres Up to 6.8 metres 16.1 metres

(3) Notwithstanding subsection (1), a person may operate a stinger-steer auto carrier on a highway when (

a) the overall length of the combination exceeds 23 metres when loaded, if (

i) the overall length of the combination when loaded does not exceed 25 metres, (ii) the overall length of the combination when unloaded does not exceed 23 metres, (iii) the front overhang beyond the bumper of the truck tractor does not exceed 1.0 metre, (iv) the effective rear overh ang of the truck tractor when loaded does not exceed 4.6 metres, (

v) the load overhang at the rear of the semi-trailer does not exceed 1.2 metres, (vi) the overall length of th e truck tractor does not exceed 12.5 metres, and (vii) the trailer length of the semi-trailer does not exceed 14.65 metres; (

b) the height of the truck tr actor or semi-trailer exceeds 4.15 metres when loaded, if (

i) the height of the truck tractor and semi-trailer when loaded do not exceed 4.3 metres, and (ii) the height of the truck tr actor and semi-trailer when unloaded do not exceed 4.15 metres; (

c) the effective rear overhan g of the semi-trailer exceeds 35% of the semi-trailer wheelbase, if

Section 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 26 (

i) the effective rear overhang does not exceed 4.0 metres or 42% of the semi-trailer wheelbase, whichever is greater, (ii) the width of the load overhang at the rear of the semi-trailer does not exceed 2.3 metres, and (iii) the load overhang at the r ear of the semi-trailer does not exceed 1.2 metres.

(4) Notwithstanding subsection (1), a person may operate a toter-home on a highway when (

a) the wheelbase of the truck tractor exceeds 6.2 metres, if the truck tractor wheelbase does not exceed 9.0 metres, and (

b) the effective rear overhan g of the semi-trailer exceeds 35% of the trailer wheelbase, if the effective rear overhang of the semi-trailer does not exceed 6.0 metres.

(5) Notwithstanding subsection (1)(b)(iv)(A), a person may operate a truck manufactured after September 1, 1993, other than a truck with a tridem drive axle group, with a hitch offset that exceeds 1.8 metres but does not exceed 3.5 metres on a highway if (

a) the truck is (

i) towing a trailer connect ed by a pintle hitch, or (ii) towing a motor vehicle attached to a tow dolly or connected by a tow bar with a pintle hitch, a n d (

b) the maximum weight, including any load, of the trailer or motor vehicle does not exceed 6000 kilograms.

(6) Notwithstanding subsection (1)(b.1)(vi) and (b.2)(v), a person may operate a single steer truck with a tridem drive axle group or a twin steer truck with a tridem drive axle group with a hitch offset that exceeds 2.6 metres but does not exceed 3.8 metres on a highway if (

a) the truck is (

i) towing a trailer connect ed by a pintle hitch, or (ii) towing a motor vehicle attached to a tow dolly or connected by a tow bar with a pintle hitch, a n d

Section 5 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 27 (

b) the maximum weight, including any load, of the trailer or motor vehicle does not exceed 6000 kilograms.

(7) Notwithstanding subsection (1)(b)(iv), a person may operate a truck manufactured after September 1, 1993, other than a truck with a tandem or tridem drive axle group, towing a recreational travel trailer, with a hitch offset that exceeds 1.8 metres but does not exceed 4.9 metres on a highway if (

a) the trailer is connected t o the truck with a ball hitch combined with a weight distributing hitch, or with a fifth wheel, (

b) the trailer is being towed on its own axles and wheels, an d (

c) the truck is only towing one trailer. AR 315/2002 s4;147/2019;125/2020;148/2022 Outside projections 5 In determining the dimensions of a commercial vehicle for the purposes of

section 4, (

a) an outside rear-view mirror is not included in determining the width of the vehicle, unless the mirror protrudes more than 30 centimetres beyond the widest part of the vehicle or its load, and (

b) repealed AR 147/2019 s5. (

c) auxiliary equipment is not included in determining the width of the vehicle, unless the auxiliary equipment protrudes more than 10 centimetres on either side beyond the widest part of the vehicle or its load; (

d) aerodynamic devices insta lled at the rear of trucks, trailers, and semi-trailers and not designed or used to carry cargo are not included in determining the measurement of overall length, trailer length, semi-trailer length, box length and effective rear overhang, unless: (

i) any portion of the devi ce more than 1.9 metres above the ground protrudes more than 1.52 metres beyond the rear of the vehicle, (ii) any portion of the devi ce within 1.9 metres of the ground protrudes beyond a transverse plane starting from the rear bottom edge of the rear impact guard or, if not so equipped, the lowest point at the rear of the vehicle and intersecting a point that is 1.74

Section 5 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 28 metres above the ground and 1.21 metres behind the rear of the vehicle as shown in the diagram below: (iii) the device is not capab le of being folded within 0.305 metres of the rear of the vehicle, or (iv) the device obstructs or diminishes lighting and conspicuity markings required by the Act and its regulations; (d.1) forklifts attached at th e rear of semi-trailers, B-trains and full trailers are not included in determining the measurement of overall length, full trailer length, semi-trailer length and box length unless the forklift protrudes more than 1.5 metres beyond the rear of the vehicle; (d.2) forklifts attached at the rear of trucks are not included in determining the measurement of overall length and effective rear overhang unless the forklift protrudes more than 1.5 metres beyond the rear of the vehicle; (

e) heavy duty bumpers and devices designed to reduce the impact of wildlife collisions are not included, except in the case of a B-train, in determining the measurement of overall length, unless they extend more than 30 centimetres beyond the front of trucks or truck tractors; (

f) heavy duty bumpers and devices designed to reduce the impact of wildlife collisions are included in the measurement of overall B-train length. AR 315/2002 s5;147/2019;125/2020;148/2022

Section 6 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 29 Width exceptions for farm equipment 6 The provisions of

section 4 with respect to the width of a commercial vehicle do not apply to (

a) a rubber tired farm tractor equipped with a dozer blade, i f conspicuously displayed on each side of the widest part of the farm tractor, or displayed at the extremities of the blade, there are, (

i) when the farm tractor is used during daytime, warning flags, and (ii) when the farm tractor is used during night time, (

A) warning lights, or (

B) warning flags made of fluorescent material that are adequately illuminated by the farm tractor’s working lights; (

b) farm equipment loaded on a trailer (

i) during daytime, if warning flags are displayed at the widest part of the vehicle or load, or (ii) during night time, if warn ing lights are displayed at the widest part of the vehicle or load; (b.1) a trailer or its load, if (

i) the trailer and its load are less than 3.8 metres in width, (ii) the trailer and its load are being towed by a farm tractor, and (iii) the trailer is being used t o move materials incidental to farm operations from one farm or field to another farm or field or from one portion of the farm or field to another portion of the farm or field; (

c) any other farm equipment (

i) during daytime, or (ii) during night time, if warn ing lights are displayed at the widest part of the vehicle or load. AR 315/2002 s6;117/2018;147/2019

Section 7 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 30 General width exceptions 7 The provisions of

section 4 with respect to the width of a commercial vehicle do not apply to (

a) a commercial vehicle that is (

i) road construction equipment or maintenance equipment, whether being towed or travelling under its own power, or (ii) a grader or snow plow, if, conspicuously displayed on each side of the widest part of the vehicle, or in the case of a vehicle equipped with a blade or snow plow, displayed at the extremities of the blade or the mould board, there are, (iii) when the vehicle is used during daytime, warning flags, and (iv) when the vehicle is used during night time, (

A) warning lights, or (

B) warning flags made of fluorescent material that are adequately illuminated by the vehicle’s working lights; (

b) repealed AR 147/2019 s7. AR 315/2002 s7;147/2019 Width and height exceptions 8 The provisions of

section 4 with respect to the width and height of a commercial vehicle do not apply to (

a) a commercial vehicle tran sporting hay or straw within a 50-kilometre radius of the load’s place of origin if (

i) the load is not more than (A) 3.2 metres in width, and (B) 5 metres in height f rom the surface of the highway, a n d (ii) when the load is being tr ansported during night time, adequate warning lights are displayed on the extreme corners of the load or vehicle, whichever is the wider;

Section 8 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 31 (

b) a commercial vehicle tran sporting stacks or round bales of hay or straw within a 50-kilometre radius of the load’s place of origin if (

i) the load is not more than (A) 4 metres in width, and (B) 5 metres in height f rom the surface of the highway, a n d (ii) when the load is more than 3.2 metres in width and is being transported during night time, there are displayed (

A) to the front of the vehicle a dimensional sign that complies with a sign shown in

Schedule 2 or 3, (

B) a revolving amber flashing lamp on the vehicle, and (

C) adequate warning lights on the extreme corners of the load or vehicle, whichever is the wider; (

c) a commercial vehicle equipped to transport a load referred to in clause (

a) or (

b) if, when the vehicle is empty, any deck extensions or outriggers are folded down or retracted so that the vehicle is no more than 2.8 metres in width; (

d) a commercial vehicle moving a grain bin on a highway outside an urban area, other than a provincial highway under the Highways Development and Protection Act, for a distance of 60 kilometres or less during daytime if, (

i) in the case of a grain bin more than 5.3 metres in height, the movement of the grain bin is via a route approved by the local utilities companies, (ii) in the case of a grain bin less than 5.0 metres in width, the movement of the grain bin is over terrain such that visibility is not impaired so as to create a safety hazard, and (iii) in the case of a grain bin 5.0 metres or more in width, the movement of the grain bin is accompanied by a vehicle with hazard warning lights flashing. AR 315/2002 s8;117/2018;148/2022

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 32

Part 2 Commercial Vehicle Weights Maximum weight 9(1) Subject to

section 62 of the Act and

section 12(1) of this Regulation, no person shall operate a commercial vehicle on a highway when (

a) the gross weight on a tire other than a wide-base single tire exceeds the smallest of the following: (i) 3650 kilograms; (ii) the capacity determine d by multiplying the cross

section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms; (iii) repealed AR 121/2009 s47; (a.1) in the case of a wide-bas e single tire on a single carrying axle, the gross weight on the wide-base single tire exceeds 4550 kilograms; (a.2) in the case of a wide-bas e single tire on any other axle group, the gross weight on the wide-base single tire exceeds the smallest of the following: (i) 4550 kilograms; (ii) the capacity determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms; (

b) the gross weight on (

i) a steering axle (

A) in the case of a truck tractor, other than a truck tractor with a tridem drive axle group, exceeds 6000 kilograms; (

B) in the case of a truck tractor with a tridem drive axle group, is less than 27 percent of the weight on the drive axle or exceeds 7300 kilograms; (

C) in the case of a truck, bus, bed truck, picker truck or winch truck, other than a truck, bed truck, picker truck or winch truck with a tridem drive axle group, exceeds 7300 kilograms;

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 33 (

D) in the case of a bed truck, picker truck or winch truck with a tridem drive axle group, is less than 25 percent of the weight on the drive axle or exceeds 7300 kilograms; (

E) in the case of any othe r single steer truck with a tridem drive axle group, is less than 25 percent of the weight on the drive axle or exceeds 7300 kilograms; (ii) a twin steer, other than a twin steer truck with a tridem drive axle group, exceeds 13 600 kilograms; (iii) a twin steer truck with a tridem drive axle group is less than 40 percent of the weight on the drive axle or exceeds 13 600 kilograms; (iv) any other steering axle group exceeds 6000 kilograms; (

c) in the case of a vehicle having a gross weight in excess o f 11 800 kilograms, other than a twin steer truck with a tridem drive axle group, the interaxle spacing (

i) from a steering axle to an adjacent axle group is less than 3 metres; (ii) from a twin ste er or any other steering axle group to an adjacent axle group exceeds 5 metres; (

d) the gross weight on a single carrying axle or any axle within an axle group exceeds 9100 kilograms; (

e) in the case of a vehicle ha ving a tandem axle group or any 2 adjacent axles within an axle group (

i) with 8 or more tires, the gross weight on the axle group or axles exceeds 17 000 kilograms; (ii) with fewer than 8 tires, other than where there are 4 wide-base single tires, the gross weight on the axle group or axles exceeds 13 600 kilograms; (iii) with 4 wide-base single tir es, the gross weight on the axle group or axles exceeds 17 000 kilograms; (

f) in the case of a vehicle having a tridem axle group (

i) with 12 or more tires, the gross weight on the axle group

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 34 (

A) exceeds 24 000 kilograms, if the axle spread is 3.0 metres or more, but not more than 3.7 metres; (

B) exceeds 21 000 kilograms, if the axle spread is 2.4 metres or more, but less than 3.0 metres; (ii) repealed AR 125/2020 s6; (iii) with fewer than 12 tires, other than 6 wide-base single tires, the gross weight on the axle group exceeds 19 000 kilograms; (iv) with 6 wide-base single tires, the gross weight on the axle group (

A) exceeds 24 000 kilograms, if the axle spread is 3.0 metres or more, but not more than 3.7 metres; (

B) exceeds 21 000 kilograms, if the axle spread is 2.4 metres or more, but less than 3.0 metres; (f.1) in the case of a vehicle having a tridem drive axle grou p, other than a twin steer truck with a tridem drive axle group, the gross weight on the tridem drive axle group exceeds 23 000 kilograms; (f.2) in the case of a twin st eer truck with a tridem drive axle group, the gross weight on the tridem drive axle group exceeds the weights outlined in the following table: Tridem Drive Axle Spread (metres) Minimum Wheelbase (metres) Maximum Tridem Drive Axle Weight (kg) 2.4 to less than 2.8 7.70 23 000 2.8 to less than 3.05 7.80 23 000 3.05 to 3.1 7.90 24 000 (f.3) repealed AR 125/2020 s6; (

g) the gross weight on a quantum axle group exceeds (i) 9100 kilograms for a quantum axle group consisting of 2 axles; (ii) 17 000 kilograms for a quantum axle group consisting of 3 or more axles with 12 or more tires;

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 35 (iii) 15 000 kilograms for a quantum axle group consisting of 3 or more axles with fewer than 12 tires; (

h) the sum of the gross weight for 2 axle groups exceeds (

i) the sum of the maximum permitted gross axle group weight when the interaxle spacing is equal to or greater than the minimum specified in subsection (2); (ii) the sum of the maximum permitted gross axle group weight, minus 500 kilograms for every 0.1 metre or portion thereof that the interaxle spacing is less than the minimum specified in subsection (2); (iii) 23 000 kilograms in the cas e of the axles on the lead trailer and the converter dolly axle of an A-train or C-train when the interaxle spacing is less than 3.0 metres; (

i) the sum of the gross weight on the axle or axle groups in the full trailer of (

i) an A-train or C-train exceeds the sum of weight of the truck tractor drive axle group and the lead trailer axle or axle group; (ii) a truck and full traile r combination exceeds 31 000 kilograms; (

j) in the case of a bus with 2 rear axles, the gross weight on the single tired axle exceeds 6000 kilograms and the gross weight on the dual tired axle exceeds 9100 kilograms; (

k) the maximum gross weig ht of the vehicle exceeds (

i) the sum of the maximum permitted gross axle weights; (ii) in the case of a truck an d full trailer combination, other than a truck with a tridem drive axle group, 55 300 kilograms; (ii.1) in the case of a truck tractor with a tridem drive axle group and semi-trailer combination, 54 300 kilograms; (ii.2) in the case of a single s teer truck with a tridem drive axle group and full trailer combination, 61 300 kilograms;

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 36 (ii.3) in the case of a twin s teer truck with a tridem drive axle group and full trailer combination, 63 500 kilograms; (ii.4) in the case of a twin s teer truck with a tridem drive axle group and pony trailer combination, 58 600 kilograms; (iii) in the case of an A-train, 53 500 kilograms; (iv) in the case of a B-train, 63 500 kilograms; (

v) in the case of a C-train, 60 500 kilograms; (vi) in the case of a jeep logger, 56 500 kilograms; (vii) in the case of any other vehicle or combination of vehicles, 53 500 kilograms; (viii) repealed AR 125/2020 s6.

(1.1) Notwithstanding subsection (1)(

a) and (b)(i)(C), a person may operate a bed truck, picker truck or winch truck, other than a bed truck, picker truck or winch truck with a tridem drive axle group, on a highway when (

a) the gross weight on the steering axle of the truck exceeds 7300 kilograms, and (

b) the gross weight on a tire on the steering axle of the tru ck exceeds 3650 kilograms, if (

c) the gross weight on the steering axle of the truck does no t exceed 7700 kilograms, (

d) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 385 millimetres, (

e) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the steering axle, (

f) in the case of a truck with a fifth wheel, the pin setting is neutral or negative, and (

g) the gross weight on any tire is no greater than the capaci ty determined by multiplying the cross-section dimension of the tire in millimetres, as determined

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 37 by the manufacturer’s width shown on the tire, by 10 kilograms.

(1.2) Notwithstanding subsection (1)(

a) and (b)(i)(C), a person may operate a bed truck, picker truck or winch truck, other than a bed truck, picker truck or winch truck with a tridem drive axle group, on a highway when (

a) the gross weight on the steering axle of the truck exceeds 7300 kilograms, and (

b) the gross weight on a tire on the steering axle of the tru ck exceeds 3650 kilograms, if (

c) the gross weight on the steering axle of the truck does no t exceed 8500 kilograms, (

d) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 425 millimetres, (

e) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the steering axle, (

f) in the case of a truck with a fifth wheel, the pin setting is neutral or negative, and (

g) the gross weight on any tire is no greater than the capaci ty determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms.

(1.3) Notwithstanding subsection (1)(

a) and (b)(i)(C), a person may operate a bed truck, picker truck or winch truck, other than a bed truck, picker truck or winch truck with a tridem drive axle group, on a highway when (

a) the gross weight on the steering axle of the truck exceeds 7300 kilograms, and (

b) the gross weight on a tire on the steering axle of the tru ck exceeds 3650 kilograms and the capacity determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms, if

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 38 (

c) the gross weight on the steering axle of the truck does no t exceed 9100 kilograms, (

d) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 445 millimetres, (

e) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the steering axle, and (

f) in the case of a truck with a fifth wheel, the pin setting is neutral or negative.

(1.4) Notwithstanding subsection (1)(a)and (b)(i)(D), a person may operate a bed truck, picker truck or winch truck with a tridem drive axle group on a highway when (

a) the gross weight on the steering axle of the truck exceeds 7300 kilograms, and (

b) the gross weight on a tire on the steering axle of the tru ck exceeds 3650 kilograms, if (

c) the gross weight on the steering axle of the truck does no t exceed 7700 kilograms, (

d) the gross weight on the steering axle is not less than 25 percent of the weight on the drive axle, (

e) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 385 millimetres, (

f) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the steering axle, (

g) in the case of a truck with a fifth wheel, the pin setting is neutral or negative, and (

h) the gross weight on any tire is no greater than the capaci ty determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms.

(1.5) Notwithstanding subsection (1)(

a) and (b)(i)(D), a person may operate a bed truck, picker truck or winch truck with a tridem drive axle group on a highway when

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 39 (

a) the gross weight on the steering axle of the truck exceeds 7300 kilograms, and (

b) the gross weight on a tire on the steering axle of the tru ck exceeds 3650 kilograms, if (

c) the gross weight on the steering axle of the truck does no t exceed 8500 kilograms, (

d) the gross weight on the steering axle is not less than 25 percent of the weight on the drive axle, (

e) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 425 millimetres, (

f) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the steering axle, (

g) in the case of a truck with a fifth wheel, the pin setting is neutral or negative, and (

h) the gross weight on any tire is no greater than the capaci ty determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms.

(1.6) Notwithstanding subsection (1)(

a) and (b)(i)(D), a person may operate a bed truck, picker truck or winch truck with a tridem drive axle group on a highway when (

a) the gross weight on the steering axle of the truck exceeds 7300 kilograms, and (

b) the gross weight on a tire on the steering axle of the tru ck exceeds 3650 kilograms and the capacity determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms, if (

c) the gross weight on the steering axle does not exceed 9100 kilograms, (

d) the gross weight on the steering axle is not less than 25 percent of the weight on the drive axle,

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 40 (

e) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 445 millimetres, (

f) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the steering axle, and (

g) in the case of a truck with a fifth wheel, the pin setting is neutral or negative.

(1.7) Notwithstanding subsection (1)(b)(ii), a person may operate a twin steer bed truck, picker truck or winch truck, other than a twin steer bed truck, picker truck or winch truck with a tridem drive axle group, on a highway when the gross weight on the twin steer axle group of the truck exceeds 13 600 kilograms, if (

a) the gross weight on the twin steer axle group of the truck does not exceed 14 600 kilograms, (

b) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 365 millimetres, (

c) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the twin steer axle group of the truck, and (

d) in the case of a truck with a fifth wheel, the pin setting is neutral or negative.

(1.8) Notwithstanding subsection (1)(

a) and (b)(ii), a person may operate a twin steer bed truck, picker truck or winch truck, other than a twin steer bed truck, picker truck or winch truck with a tridem drive axle group, on a highway when (

a) the gross weight on the twin steer axle group of the truck exceeds 13 600 kilograms, and (

b) the gross weight on a tire on the twin steer axle group of the truck exceeds 3650 kilograms, if (

c) the gross weight on the twin steer axle group of the truck does not exceed 15 200 kilograms, (

d) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 385, 425 or 445 millimetres,

Section 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 41 (

e) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the twin steer axle group of the truck, (

f) in the case of a truck with a fifth wheel, the pin setting is neutral or negative, and (

g) the gross weight on any tire is no greater than the capaci ty determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms.

(1.9) Notwithstanding subsection (1)(b)(iii), a person may operate a twin steer bed truck, picker truck or winch truck with a tridem drive axle group on a highway when the gross weight on the twin steer axle group of the truck exceeds 13 600 kilograms, if (

a) the gross weight on the twin steer axle group of the truck does not exceed 14 600 kilograms, (

b) the gross weight on the twin steer axle group of the truck is not less than 40 percent of the weight on the drive axle, (

c) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 365 millimetres, (

d) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the twin steer axle group of the truck, and (

e) in the case of a truck with a fifth wheel, the pin setting is neutral or negative.

(1.91) Notwithstanding subsection (1)(

a) and (b)(iii), a person may operate a twin steer bed truck, picker truck or winch truck with a tridem drive axle group on a highway when (

a) the gross weight on the twin steer axle group of the truck exceeds 13 600 kilograms, and (

b) the gross weight on a tire on the twin steer axle group of the truck exceeds 3650 kilograms, if (

c) the gross weight on the twin steer axle group of the truck does not exceed 15 200 kilograms, (

d) the gross weight on the twin steer axle group of the truck is not less than 40 percent of the weight on the drive axle,

Section 10 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 42 (

e) the cross-section dimension of the tire, as determined by the manufacturer’s width shown on the tire, is 385, 425 or 445 millimetres, (

f) any load, when loaded on the deck of the truck, is positioned such that no additional weight is placed on the twin steer axle group of the truck, (

g) in the case of a truck with a fifth wheel, the pin setting is neutral or negative, and (

h) the gross weight on any tire is no greater than the capaci ty determined by multiplying the cross-section dimension of the tire in millimetres, as determined by the manufacturer’s width shown on the tire, by 10 kilograms.

(2) The minimum interaxle spacing for the purposes of subsection (1)(

h) is (a) 3 metres for 2 single axle groups; (b) 3 metres for a single axle g roup and a tandem axle group; (c) 3 metres for a single axle group and a tridem or tridem drive axle group; (d) 5 metres for 2 tandem axle groups; (e) 5.5 metres for 2 tridem axle groups or a combination of a tridem drive axle group and a tridem axle group; (f) 5.5 metres for a tandem axle group and a tridem or tridem drive axle group; (g) 5.5 metres for a quantum axle group and any other axle group.

(3) No person shall operate self-propelled equipment on a highway when the gross weight on an axle exceeds 11 000 kilograms or the gross weight of the vehicle exceeds 22 000 kilograms. AR 315/2002 s9;121/2009;117/2018;147/2019;125/2020;148/2022

Part 3 Special Conditions Emergency exceptions 10(1) The following commercial vehicles are exempt from sections 4 and 9 of this Regulation:

Section 11 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 43 (

a) a vehicle required by a road authority to transport materials needed for emergency maintenance of a highway; (

b) a vehicle transporting equi pment to a forest fire, flood, train derailment, pipeline spill or other emergency.

(2) Sections 11, 14, 15 and 16 apply to the same extent as if the vehicle referred to in subsection (1) were being operated pursuant to an overdimensional permit or an overweight permit.

(3) Repealed AR 148/2022 s7. AR 315/2002 s10;148/2022 Bridges 11(1) For the purposes of this section, “posted carrying capacity sign” means a sign described in

Schedule 1.

(2) Subject to

section 62 of the Act, no person shall operate a commercial vehicle on a bridge when (

a) a bridge displays a poste d carrying capacity sign, and (

b) the gross weight of the vehicle exceeds the posted carrying capacity.

(3) If a sign indicates that the carrying capacity of a bridge is less than the maximum permitted gross weight of a combination of vehicles, the reduction in the gross weight of the vehicles must be divided equally among all of the carrying axles of the vehicles. Road bans 12(1) The Minister may establish road bans as required.

(2) The Minister may delegate to any employee of the Government the authority to establish road bans under subsection (1) on the Minister’s behalf.

(3) The establishment of road bans under this

section is exempt from the operation of the Regulations Act.

(4) Subject to

section 62 of the Act, no person shall operate a commercial vehicle on a highway that is subject to a road ban if the weight of the carrying axle or axle group of the vehicle exceeds the specified percentage axle weight imposed by the road ban.

(5) The following vehicles are exempt from a road ban:

Section 13 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 44 (

a) a vehicle in respect of wh ich the combined gross weight of all the axles of the vehicle does not exceed 5000 kilograms; (

b) a school bus as defined in the Use of Highway and Rules of the Road Regulation; (

c) a rubber tired farm tractor if it is not pulling a trailer; (

d) a vehicle crossing a highway; (

e) a vehicle operated by or on behalf of the Government for the purpose of testing pavement strength; (

f) a vehicle transporting fres h milk and cream, or either of them, from the place where the milk or cream is produced; (

g) a vehicle transporting pre gnant mare urine from the place where the urine is produced; (

h) a vehicle transporting eggs from the place where the eggs are produced.

(6) If a road ban is in effect, the following commercial vehicles may carry on the axles on that highway up to 90% of the maximum allowable weight permitted for that axle group: (

a) a vehicle transporting (

i) b r e a d , (ii) repealed AR 30/2004 s2, (iii) mail as defined in the Canada Post Corporation Act (Canada), (iv) heating fuel, or (

v) fertilizer; (

b) a bus, other than a school bus, carrying passengers.

(7) If a road ban is in effect, a commercial vehicle transporting domestic drinking water may carry on the axles on that highway up to 80% of the maximum allowable weight permitted for that axle group. AR 315/2002 s12;30/2004;147/2019 Licence of occupation road 13(1) In this section,

Section 14 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 45 (a) “licence of occupation road ” means a road held under a licence of occupation granted under the Public Lands Administration Regulation; (b) “roadway width” means the width of the travelled surface of a licence of occupation road as measured from shoulder to shoulder.

(2) In the case of a commercial vehicle operating on a licence of occupation road, (

a) sections 4 and 9 do not apply, (

b) subject to clause (c), sections 14, 15 and 16 apply to the same extent as if the commercial vehicle were being operated pursuant to an overdimensional permit, and (

c) sections 14, 15 and 16 do not apply if the commercial vehicle is carrying a load of logs.

(3) No person shall, on a licence of occupation road, operate a commercial vehicle used to carry logs when the front or rear bunk width of the vehicle exceeds that permitted for the roadway width as determined by the following table: Roadway Width Maximum Bunk Width Front Rear (a) 6 metres or more but less than 7.3 metres 3.2 metres 2.6 metres (b) 7.3 metres or more but less than 9.1 metres 3.65 metres 3.05 metres (c) 9.1 metres or more 4.57 metres 3.96 metres (4) Subsection (3) does not apply to an access road, to a landing or to a block. AR 315/2002 s13;121/2009;187/2011

Part 4 Overdimensional and Overweight Commercial Vehicles Definition 14 In this Part, “overdimensional vehicle” means a commercial vehicle referred to in

section 15 that is operated under the authority of an overdimensional permit.

Section 15 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 46 Overdimensional safety requirements 15(1) Notwithstanding that a commercial vehicle or its load does not comply with

section 4, a person may operate that vehicle on a highway where permitted to do so under the authority of an overdimensional permit.

(2) A person who operates a commercial vehicle on a highway under the authority of an overdimensional permit shall ensure that the vehicle and related equipment used in the operation of that vehicle comply with this Part and that the operation is carried out in accordance with this Part.

(3) When a commercial vehicle is being operated under the authority of an overdimensional permit and the widest part of the vehicle or its load is more than (a) 2.6 metres in width, the vehicle must be equipped with (

i) warning flags, if operated during daytime, and (ii) warning lights, if operated during night time or during adverse weather conditions, that are displayed on each sid e at the widest part of the vehicle or load; (b) 3.05 metres in width, the vehicle must, in addition to clause (a), be equipped with 2 dimensional signs that comply with

Schedule 2, 3, 3.1 or 3.2, or if the vehicle is less than 26 metres in length then it must be equipped with 2 dimensional signs that comply with

Schedule 2, 3, 3.1, 3.2 or 3.3, (

i) one sign being (

A) displayed at the front of the vehicle, or (

B) mounted on the cab of the vehicle in such a manner that the sign is clearly visible to traffic approaching on a 2-lane highway, and (ii) one sign being displayed at the extreme rear of the vehicle or its load, whichever is further to the rear, in such a manner that the sign is clearly visible to traffic approaching from the rear; (c) 3.35 metres in width, the vehicle must, in addition to being equipped as required under clauses (

a) and (b), be equipped with one or more flashing lamps;

Section 16 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 47 (d) 3.85 metres in width, the vehicle (

i) must, in addition to being equipped as required under clauses (

a) to (c), (

A) when on a 2-lane highway, (

I) if it or its load is n ot more than 4.45 metres in width, be accompanied by a pilot vehicle, and (II) if it or its load is more than 4.45 metres in width, be accompanied by a pilot vehicle and a trail vehicle, a n d (

B) when on a multi-lane highway, (

I) if it or its load is n ot more than 5.5 metres in width, be accompanied by a trail vehicle, and (II) if it or its load is more than 5.5 metres in width, be accompanied by a pilot vehicle and a trail vehicle, unless the permit provides otherwise, and (ii) must not be operated on a highway (

A) from 3 p.m. until midni ght on a Friday or a day preceding a statutory holiday, or (

B) on Sunday or a statutory holiday.

(4) Repealed AR 148/2022 s7. AR 315/2002 s15;147/2019;148/2022 Escort vehicles 16(1) When an overdimensional vehicle is required by an overdimensional permit to be accompanied by an escort vehicle, 2-way radio communication must be maintained between each of the vehicles at all times.

(2) A pilot vehicle accompanying an overdimensional vehicle must precede it at a distance of 300 to 1000 metres.

(3) A trail vehicle accompanying an overdimensional vehicle must follow it at a distance of 100 to 300 metres.

Section 16 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 48

(4) An escort vehicle must be equipped with a dimensional sign (

a) that complies with a sign shown in

Schedule 4, 5, 5.1 or 5.2, and (

b) that is mounted in such a manner as to be visible from both the front and rear of the vehicle.

(5) When a dimensional sign shown in

Schedule 4, 5.1 or 5.2 is mounted on an escort vehicle, (

a) only the outboard lights must be used under normal weather and highway conditions, and (

b) the inboard lights must be used only (

i) under adverse weather or highway conditions, (ii) when turning or flagging, or (iii) during a mechanical breakdown.

(6) When a dimensional sign shown in

Schedule 5 is mounted on an escort vehicle, the flashing lamps must be used at all times during which the vehicle is accompanying an overdimensional vehicle.

(7) A vehicle, while engaged as an escort vehicle, must not (

a) tow any trailer or other vehicle, or (

b) carry any load that, in any manner, obscures any lights or signs that it is required to be equipped with.

(8) An escort vehicle and, in the absence of an escort vehicle, the overdimensional vehicle must carry at least the following equipment: (

a) advance warning triangle; (b) 3 warning flags for traffic marking; (

c) one warning flag per crew member for flagging; (

d) one reflective ve st per crew member; (

e) one flashlight, equipped with signal tube, per crew member.

(9) When a person who is located outside of the cab of a vehicle is engaged in an activity with respect to the operation or movement of an overdimensional vehicle, that person shall

Section 16.1 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 49 (

a) wear a reflective vest, and (

b) make use of warning fla gs or flashlights as may be necessary to warn or give directions to traffic on the highway.

(10) The equipment referred to in subsection (8) must be maintained in a clean condition and in good repair.

(11) Repealed AR 148/2022 s7. AR 315/2002 s16;117/2018;147/2019;148/2022 Dimensional sign requirements 16.1 A dimensional sign described in Schedules 2, 3, 3.1, 3.2, 3.3, 4, 5, 5.1 and 5.2 must be (

a) kept in good repair, (

b) kept clean and legible at all times, and (

c) covered, folded or removed when not required to be displayed. AR 148/2022 s8 General provisions 17 Unless an overdimensional permit otherwise provides, the permit is subject to those conditions set out in

Schedule 6. Overweight permits 18(1) Notwithstanding that a commercial vehicle does not comply with

section 9, a person may operate the vehicle on a highway where permitted to do so under the authority of an overweight permit.

(2) Unless an overweight permit otherwise provides, the permit is subject to those conditions set out in

Schedule 7.

(3) An overweight permit shall not be issued unless the commercial vehicle in respect of which it is to be issued is registered up to its maximum allowable weight.

(4) A commercial vehicle in respect of which an overweight permit is issued shall not, pursuant to that overweight permit, be operated on a highway under the direction, control and management of a road authority, other than the Minister, unless that road authority has given its approval to that commercial vehicle being operated on that highway.

Section 19 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 50

Part 5 Permit Fees Permit fees 19(0.1) In this section, “transportation routing and vehicle information system agent” means a person, other than an employee of the Government, who is recognized and authorized by the Director to both submit permit applications and monitor the status of permit applications on behalf of an applicant.

(1) The following fees are payable in respect of permits for the operation of overdimensional and overweight vehicles: (

a) for a Single Trip Overd imensional Permit, the fee is $18.75; (

b) for a Multi-trip Overdimen sional Permit, the fee is $75; (

c) for an Long Combination Vehicle Permit, the fee is $375; (

d) for a High Load Corridor Permit permitting the operation of an overdimensional vehicle in a high load corridor set out in

Schedule 12, a fee per kilometre of, (

i) in the case of a commerci al vehicle having a height that is more than 6 metres but less than 8.9 metres, $1.25, plus $0.25 for every 10 centimetres over 6 metres in height; (ii) in the case of a commerci al vehicle having a height of 8.9 metres or greater, $8.50; (

e) for a Single Trip Overwei ght Permit or a Single Trip Overweight and Overdimensional Permit, the fee for each vehicle to which the permit relates is the total of the amounts under subclauses (

i) to (iii): (i) $0.03 per tonne per kilometre over the lesser of (

A) the registered weight, and (

B) the sum of allowable axle weights for the vehicle (being the gross weight for the steering axle, as set out in

section 9(1)(b), and the base weight for all other axles, as set out in

Schedule 9); (ii) the steering axle wei ght fee calculated using

Schedule 8;

Section 19 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 51 (iii) the axle group weight fee calculated using

Schedule 9; (

f) for a Multi-trip Overwei ght Permit or a Multi-trip Overweight and Overdimensional Permit, the fee is the total of the amounts under subclauses (

i) to (iii): ( i ) $ 7 5 ; (ii) the steering axle wei ght fee calculated using

Schedule 10; (iii) the axle group weight fee calculated using

Schedule 11; (

g) for an Overload Self-recording Permit, a fee of $18.75 for the authorization permit, plus the Single Trip Overweight Permit fee pursuant to clause (e).

(2) Notwithstanding subsection (1), the fee payable for the issuance of an overweight permit for a commercial vehicle that is carrying a load of logs is (a) $250 per log haul season, and (b) $25 per route map, wher e it is a condition of the overweight permit that a route map must be attached to the permit in order for the permit to be valid.

(3) For the purposes of subsection (2), the Director shall determine the term of the log haul season.

(4) No fee is payable for an overweight permit or an overdimensional permit issued to (

a) the Government of Canada, (

b) the Government of Alberta or the government of another province, (

c) a foreign government, (

d) a municipality, or (

e) a board as defined in the Education Act.

(5) Repealed AR 47/2014 s3.

(5.1) In a municipality other than a city or a town, no fee is payable for an overweight permit or an overdimensional permit issued for a point to point move within an industrial park if the municipality has passed a bylaw to that effect.

Section 21 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 52

(5.2) No fee is payable for the period from April 1, 2014 to June 30, 2014 for a permit allowing the operation of a commercial vehicle used for the transport of grain on a highway that is subject to a road ban under

section 12.

(6) The total of any fee payable under this

section must be rounded off to the nearest dollar.

(7) Notwithstanding anything in this section, the minimum fee payable for a permit under this Regulation is $18.75 unless a discount of the fee under subsection (9) reduces the fee to an amount less than $18.75, and for the purpose of subsection (1)(e), the minimum fee shall be calculated for each vehicle to which the permit relates.

(8) Notwithstanding anything in this section, no fee is payable for an overdimensional permit, where the commercial vehicle in respect of which the permit is to be issued is a Class 2 commercial vehicle within the meaning of

section 77(1)(

b) of the Operator Licensing and Vehicle Control Regulation.

(9) The Director may reduce a fee payable under this

section by $6.25 where the application for a permit is submitted by a transportation routing and vehicle information system agent on behalf of an applicant, and for the purpose of applying the fee discount to a permit issued under subsection (1)(e), the fee discount shall be calculated for each vehicle to which the permit relates. AR 315/2002 s19;30/2004;50/2005;72/2008;121/2009; 47/2014;58/2014;117/2018;81/2019;28/2025

Part 6 Miscellaneous 20 Repealed AR 117/2018 s4. Offences 21 It is an offence to contravene or fail to comply with the following provisions of this Regulation:

section 3;

section 4;

section 9(1);

section 9(3);

section 11(2);

section 12(4);

section 13(3);

section 15(3)(a);

section 15(3)(b);

section 15(3)(c);

Section 22 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 53

section 15(3)(d);

section 16(1);

section 16(2);

section 16(3);

section 16(4);

section 16(5);

section 16(6);

section 16(7);

section 16(8);

section 16(9);

section 16(10);

section 16.1;

section 18(4). AR 315/2002 s21;121/2009;148/2022 Repeal 22 The Public Vehicle Dimension and Weight Regulation (AR 127/98) is repealed. Expiry 23 For the purpose of ensuring that this Regulation is reviewed for ongoing relevancy and necessity, with the option that it may be repassed in its present or an amended form following a review, this Regulation expires on July 1, 2027. AR 315/2002 s23;30/2004;140/2009;114/2011;80/2013; 100/2015;117/2018;148/2022 Coming into force 24 This Regulation comes into force on the coming into force of

Part 7, Division 4 of the Traffic Safety Act.

Schedule 1 AR 315/2002 54 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION

Schedule 1 Sign Posting Carrying Capacity of a Bridge 1 For the purpose of posting the carrying capacity of a bridge, the sign attached to this

Schedule is prescribed. 2 The symbols used on the attached sign have the following meanings: (

a) the uppermost symbol means (

i) a single unit truck, or (ii) a truck tractor and a semi-trailer, in the case where the inter-axle spacing between the truck tractor and the semi-trailer is less than 4.5 metres; (

b) the middle symbol means (

i) a truck and a trailer, (ii) a truck tractor and a semi-trailer, in the case where the inter-axle spacing between the truck tractor and the semi-trailer is 4.5 metres or more, (iii) a mobile crane with a boom dolly, (iv) a truck tractor in com bination with a single axle semi-trailer and (

A) a semi-trailer, or (

B) a pole trailer, o r (

v) a truck or truck tractor in combination with a pole trailer; (

c) the bottom symbol means (

i) a truck tractor in combination with 2 or more trailers, (ii) a truck and a full traile r with 2 tandem axles, in the case where the inter-axle spacing between the tandem axle groups is 5.0 metres or more, or

Schedule 2 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 55 (iii) a truck tractor in combination with a tandem axle semi-trailer and (

A) a semi-trailer, or (

B) a pole trailer. AR 315/2002 Sched. 1;117/2018

Schedule 2 Sign for Overdimensional Loads 1 The sign or rigid area must be 2.40 to 2.45 metres by 0.3 metres. 2 The letter “D” must be white in colour and must be 20 centimetres high, Series E. 3 The white portions of the sign or rigid area must be white in colour with a good reflective quality.

Schedule 3 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 56 4 The red portions of the sign or rigid area must be red in colour and painted with the transparent red paint used for stop signs. AR 315/2002 Sched. 2;117/2018;147/2019

Schedule 3 Alternate Sign for Overdimensional Loads 1 The panel size must be 1.5 metres by 0.3 metres. 2 The lettering must be black on a yellow background. 3 The lettering “Wide Load” must be 20 centimetres high, Series C. 4 The panel must have a 9.5 millimetre black border at the panel’s edge. AR 315/2002 Sched. 3;117/2018

Schedule 3.1 Alternate Sign for Overdimensional Loads (SMALL D) 1 The sign or rigid area must be 1.80 metres by 0.3 metres. 2 The letter “D” must be white in colour and must be 20 centimetres high, Series E. 3 The white portions of the sign or rigid area must be white in colour with a good reflective quality.

Schedule 3.2 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 57 4 The red portions of the sign or rigid area must be red in colour and painted with the transparent red paint used for stop signs. AR 147/2019 s13

Schedule 3.2 Alternate Sign for Overdimensional Loads (OVERSIZED) 1 The panel size must be 1.80 to 2.45 metres by 0.3 metres. 2 The lettering must be black on a yellow background. 3 The lettering “OVERSIZE LOAD” must be 20 centimetres high, Series C, or 4 centimetre stroke, 28 centimetres high. AR 147/2019 s13

Schedule 3.3 Alternate Sign for Overdimensional Loads (WIDE) 1 The panel size must be 1.80 to 2.45 metres by 0.3 metres. 2 The lettering must be black on a yellow background. 3 The lettering “WIDE LOAD” must be 20 centimetres high, Series C, or 4 centimetre stroke, 28 centimetres high. AR 147/2019 s13

Schedule 4 Sign for Pilot and Trail Vehicles This sign is designed to be mounted on a vehicle top, carriers or an equivalent surface. It has 2 positions: upright when in use and folded flat on the carrier when not in use.

Schedule 4 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 58 Specifications 1 BOX — must be 180 centimetres by 35 centimetres by 10 centimetres and constructed of non-corroding shiny metal such as aluminum, stainless steel, or mild steel with inside and outside surfaces of baked white enamel or a white reflective coating. The box must shelter all wire connectors, switches, flashers, etc. 2 LAMPS INSIDE THE BOX - 8 lamps must be mounted in the box and spaced to give even lighting of the sign background, or alternatively the lighting inside the box may be as follows: (

a) two sealed headlamps mount ed at either end of the box and facing each other, (

b) LED strip lighting of a b rightness and location to give even lighting of the sign background. The sign box may be less than 10 centimetres deep if equipped with interior LED strip lighting, or (

c) self-illuminating uniform lighting having, during night time, luminance output not exceeding 100 candela per square metre. 3 SIGN - must be 3 millimetres thick with a white plexiglass background with red bars painted with transparent red paint.

The letter “D” must be white in colour and must be 20 centimetres high, Series E. 4 OUTBOARD LIGHTS - must consist of two 175-millimetre (minimum) amber lights with reflectors, rated at 12.5 volts, 3 amps and 0.50 candela with a rated life of 300 hours. 5 INBOARD LIGHTS - must consist of 2 standard 203-millimetre rotating amber lights, with 2 seal beam units per lamp, or alternatively must consist of 2 amber strobe lights. The strobe lights must be visible from 360 degrees at a minimum distance of 300 metres and produce between 30 and 90 flashes per minute. AR 315/2002 Sched. 4;117/2018;147/2019

Schedule 5 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 59

Schedule 5 Alternate Sign for Pilot and Trail Vehicles This sign is designed to be mounted on a vehicle top, carriers or an equivalent surface. It has 2 positions: upright when in use and folded flat on the carrier when not in use. Specifications 1 BOX - must be 180 centimetres by 35 centimetres by 10 centimetres and constructed of mild steel material with inside and outside surfaces of baked white enamel or a white reflective coating. Eight lamps must be mounted in the box and spaced to give even lighting of the sign background.

The box must shelter all wire connectors, switches, flashers, etc. 2 SIGN - must be 3 millimetres thick, with a yellow plexiglass background with 28-centimetre high black letters of 38-millimetre stroke. 3 LAMPS - must consist of two 175-millimetre (minimum) amber lights with reflectors capable of flashing simultaneously at 60 to 90 flashes per minute, rated at 12.5 volts, 3 amps and 0.50 candela with a rated life of 300 hours. AR 315/2002 Sched. 5;117/2018;147/2019

Schedule 5.1 Alternate Sign for Pilot and Trail Vehicles (WIDE) This sign is designed to be mounted on a vehicle top, carriers or an equivalent surface. It has 2 positions: upright when in use and folded flat on the carrier when not in use.

Schedule 5.2 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 60 Specifications 1 BOX - must be 180 centimetres by 35 centimetres by 10 centimetres and constructed of non-corroding shiny metal such as aluminum, stainless steel, or mild steel with inside and outside surfaces of baked white enamel or a white reflective coating. The box must shelter all wire connectors, switches, flashers, etc. 2 LAMPS INSIDE THE BOX - 8 lamps must be mounted in the box and spaced to give even lighting of the sign background, or alternatively the lighting inside the box may be as follows: (

a) two sealed headlamps mount ed at either end of the box and facing each other, (

b) LED strip lighting of a b rightness and location to give even lighting of the sign background. The sign box may be less than 10 centimetres deep if equipped with interior LED strip lighting, or (

c) self-illuminating uniform lighting having, during night time, luminance output not exceeding 100 candela per square metre. 3 SIGN - must be 3 millimetres thick plexiglass with yellow background and black letters.

The lettering “WIDE LOAD” must be 20 centimetres high, Series C, or 4 centimetre stroke, 28 centimetres high. 4 OUTBOARD LIGHTS - must consist of two 175-millimetre (minimum) amber lights with reflectors, rated at 12.5 volts, 3 amps and 0.50 candela with a rated life of 300 hours. 5 INBOARD LIGHTS - must consist of 2 standard 203-millimetre rotating amber lights, with 2 seal beam units per lamp, or alternatively must consist of 2 amber strobe lights. The strobe lights must be visible from 360 degrees at a minimum distance of 300 metres and produce between 30 and 90 flashes per minute. AR 147/2019 s16

Schedule 5.2 Alternate Sign for Pilot and Trail Vehicles (OVERSIZED) This sign is designed to be mounted on a vehicle top, carriers or an equivalent surface. It has 2 positions: upright when in use and folded flat on the carrier when not in use.

Schedule 5.2 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 61 Specifications 1 BOX - must be 180 centimetres by 35 centimetres by 10 centimetres and constructed of non-corroding shiny metal such as aluminum, stainless steel, or mild steel with inside and outside surfaces of baked white enamel or a white reflective coating. The box must shelter all wire connectors, switches, flashers, etc. 2 LAMPS INSIDE THE BOX - 8 lamps must be mounted in the box and spaced to give even lighting of the sign background, or alternatively the lighting inside the box may be as follows: (

a) two sealed headlamps mount ed at either end of the box and facing each other, (

b) LED strip lighting of a b rightness and location to give even lighting of the sign background. The sign box may be less than 10 centimetres deep if equipped with interior LED strip lighting, or (

c) self-illuminating uniform lighting having, during night time, luminance output not exceeding 100 candela per square metre. 3 SIGN - must be 3 millimetres thick plexiglass with yellow background and black letters.

The lettering “OVERSIZE LOAD” must be 20 centimetres high, Series C, or 4 centimetre stroke, 28 centimetres high. 4 OUTBOARD LIGHTS - must consist of two 175-millimetre (minimum) amber lights with reflectors, rated at 12.5 volts, 3 amps and 0.50 candela with a rated life of 300 hours. 5 INBOARD LIGHTS - must consist of 2 standard 203- millimetre rotating amber lights, with 2 seal beam units per lamp, or alternatively must consist of 2 amber strobe lights. The strobe lights must be visible from 360 degrees at a minimum distance of 300 metres and produce between 30 and 90 flashes per minute. AR 147/2019 s16

Schedule 6 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 62

Schedule 6 General Conditions to an Overdimensional Permit The following are conditions to which every permit issued in respect of an overdimensional vehicle is subject: (

a) the person to whom the pe rmit is issued assumes full responsibility to carry out or comply with, as the case may be, the conditions to which the permit is subject; (

b) the dimensions of the vehicle and load shall not exceed the useable or posted dimensions of any bridge, power lines, wires or other structures; (

c) the permit is not valid f or transport over a highway in (

i) a city, or (ii) a hamlet with a popul ation in excess of 10 000 persons, unless prior approval has been granted by the road authority having jurisdiction over that road; (

d) the holder of the permit (

i) shall move the object described in the permit entirely at the holder’s own risk, and (ii) assumes full responsibility for any damages that may occur to highways, bridges or other property as a result of this operation; (e) - (

g) repealed AR 148/2022 s11; (

h) if the equipment to be used to move an object is specified in the permit, the object must be moved by means of that equipment; (

i) under no circumstances s hall the holder of the permit remove any signs or structures along the highways or bridges without first obtaining permission from the person having jurisdiction over the sign or structure; (

j) where the load to be moved is over-height, the operator shall ascertain if there are any wires under which the object will have to be moved, and under no circumstances may the object be moved until the consent of the owner of the wires has been secured;

Schedule 6 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 63 (

k) if the object being moved is of such dimensions as to obstruct or make it difficult for ordinary traffic to pass the object, the holder of the permit shall (

i) arrange to have (

A) a person posted at some distance in front of, and (

B) a person posted at some distance behind, the object being moved in order to warn the travelling public, and (ii) make every possible effo rt to assist the travelling public and to avoid delay; (

l) if specified in the permit th at special supervision is to be provided, the holder of the permit shall (

i) arrange for that supervision to be provided by (

A) the Royal Canadian Mounted Police, (

B) an engineer of the Department of Transportation and Economic Corridors, or (

C) an authorized official, as prescribed by the issuer of the permit, and (ii) be subject to instruction of the person providing that supervision; (

m) the expense of the supervision referred to in clause (

l) shall become a liability to the holder of the permit and the holder shall discharge that liability; (

n) in the case of a breakdown of equipment, mechanical difficulties or other adverse conditions, the holder of the permit (

i) shall not abandon the object on any highway, and (ii) shall make arrangements forthwith to remove the object from the highway; (

o) if, during the movement of an object covered under the permit, a public hazard has been created either by (

i) the object becoming stationary on the highway, or

Schedule 6 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 64 (ii) damage done to bridges, culverts or other structures along the highway, the holder of the permit shall (iii) notify the appropriate highway authorities forthwith, and (iv) provide all possible assistance to the public using the highway in order to avert injury to persons or damage to property; (

p) the holder of the permit shall (

i) assume full responsibility for (

A) injury to persons, or (

B) damage to public o r private property, caused directly or indirec tly by the transportation of a vehicle or loaded vehicle under the permit, and (ii) hold harmless the Province of Alberta, its officers, agents, employees and servants from all suits, claims, damages or proceedings of any kind, as a result of the transportation of the vehicle or loaded vehicle; (

q) any security or indemnity, or both, as required by the issuer of the permit shall be provided by the applicant; (

r) when the operation of any over-width or over-length vehicle involves a vehicle that exceeds the dimensions authorized by this Regulation, the permit shall be deemed to apply to the empty trailer whether inbound or outbound; (

s) any deviation from the conditions of the permit by the permittee shall be sufficient cause (

i) to revoke or cancel the permit, and (ii) to withhold further i ssuance of permits to the permittee. AR 315/2002 Sched.6;105/2005;68/2008;117/2018; 147/2019;148/2022;216/2022

Schedule 7 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 65

Schedule 7 General Conditions to an Overweight Permit The following are conditions to which every overweight permit is subject: (

a) the person to whom the pe rmit is issued assumes full responsibility to carry out or comply with, as the case may be, the conditions to which the permit is subject; (

b) the permit is not valid for transport over (

i) banned highways where axle weights exceed ban levels, or (ii) posted bridges where the gross weight of all of the axles exceeds the posted limit, unless special approval is noted on the permit; (

c) the load shall not excee d the rated capacity of any component of the truck or trailer on which the load is being carried; (

d) the permit holder (

i) shall move the object described in the permit entirely at the permit holder’s own risk, and (ii) assumes full responsibility for any damages that may occur to roads, bridges or other property as a result of the operation; (

e) if the equipment to be used to move an object is specified in the permit, the object must be moved by means of that equipment; (

f) under no circumstances s hall the holder of the permit remove any sign or structure along the highways or bridges without first obtaining permission from the person having jurisdiction over the sign or structure; (

g) if specified in the permit th at special supervision is to be provided, the holder of the permit shall (

i) arrange for that supervision to be provided by (

A) the Royal Canadian Mounted Police, (

B) an engineer of the Department of Transportation and Economic Corridors, or

Schedule 7 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 66 (

C) an authorized official, as prescribed by the issuer of the permit, and (ii) be subject to instruction of the person providing that supervision; (

h) the expense of the supervision referred to in clause (

g) shall become a liability to the holder of the permit and the holder shall discharge that liability; (

i) in the case of a breakdown of equipment, mechanical difficulties or other adverse conditions, the holder of the permit (

i) shall not abandon the object on any highway, and (ii) shall make arrangements forthwith to remove the object from the highway; (

j) if, during the movement of an object covered under the permit, a public hazard has been created either by (

i) the object becoming stationary on the highway, or (ii) damage done to bridges, culverts or other structures along the highway, the holder of the permit shall (iii) notify the appropriate highway authorities forthwith, and (iv) provide all possible assistance to the public using the highway in order to avert injury to persons or damage to property; (

k) the holder of the permit shall (

i) assume full responsibility for (

A) injury to persons, or (

B) damage to public o r private property, caused directly or indirec tly by the transportation of a vehicle or loaded vehicle under the permit, and (ii) hold harmless the Province of Alberta, its officers, agents, employees and servants from all suits, claims, damages or proceedings of any kind, as a result of the transportation of the vehicle or loaded vehicle;

Schedule 8 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 67 (

l) any security or indemnity, or both, as required by the issuer of the permit shall be provided by the applicant; (

m) any deviation from the conditions of the permit by the permittee shall be sufficient cause (

i) to revoke or cancel the permit, and (ii) to withhold further i ssuance of permits to the permittee. AR 315/2002 Sched.7;105/2005;68/2008;216/2022

Schedule 8 Single Trip Steering Axle Fee Permitted Weight Above Legal Weight Fee Per Km ($) 0 tonne to 1 tonne 0.063 Greater than 1 tonne to 2 tonnes 0.15 Greater than 2 tonnes to 3 tonnes 0.23 Greater than 3 tonnes to 4 tonnes 0.35 Greater than 4 tonnes to 5 tonnes 0.50 Greater than 5 tonnes to 6 tonnes 0.68 Greater than 6 tonnes to 7 tonnes 0.88 Greater than 7 tonnes to 8 tonnes 1.08 Greater than 8 tonnes 1.40 AR 315/2002 Sched.8;47/2014;28/2025

Schedule 9 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 68

Schedule 9 Single Trip Axle Group Weight Fee Fee Per Km (A) (B) (C) (

D) Permitted Weight Range per Axle Group Over *Base Weight Single, Tandem, Tridem Axle and Tridem Drive Axle Groups ($) 16 Wheel Tandem ($) Wide 16 Wheel Tandem ($) 24 Wheel Tandem and 24 Wheel Tridem ($) 0t to 1t 0.04 0.04 0.04 0.04 Greater than 1t to 2t 0.09 0.08 0.08 0.08 Greater than 2t to 3t 0.15 0.14 0.13 0.13 Greater than 3t to 4t 0.23 0.21 0.18 0.18 Greater than 4t to 5t 0.33 0.28 0.24 0.23 Greater than 5t to 6t 0.45 0.36 0.31 0.30 Greater than 6t to 7t 0.58 0.46 0.40 0.36 Greater than 7t to 8t 0.73 0.58 0.48 0.43 Greater than 8t to 9t 0.68 0.58 0.51 Greater than 9t to 10t 0.80 0.68 0.59 Greater than 10t to 11t 0.94 0.76 0.68 Greater than 11t to 12t 1.08 0.88 0.78 Greater than 12t to 13t 1 0.88 Greater than 13t to 14t 1.13 0.90 Greater than 14t to 15t 1.25 1.08 Greater than 15t to 16t 1.39 1.20 Greater than 16t to 17t 1.53 1.31 Greater than 17t to 18t 1.43

Schedule 10 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 69 Greater than 18t to 19t 1.58 Greater than 19t to 20t 1.70 Greater than 20t to 21t 1.84 Greater than 21t 1.98 t = tonne *Base Weights: 1. for Single Steer Axle Group: 7300 kg 2. for Twin Steer Axle Group: 13 600 kg 3. for Single Axle Group: 9100 kg 4. for 8 Wheel Tandem Axle Group: 17 000 kg 5. for 12 Wheel Tridem Axle Group: 24 000 kg 6. for Tridem Drive Axle Group: 23 000 kg 7. for 16 Wheel Tandem Axle Group: 25 000 kg 8. for Wide 16 Wheel Tandem Axle Group: 32 000 kg 9. for 24 Wheel Tandem Axle Group: 39 000 kg 10. for 24 Wheel Tridem Axle Group: 34 000 kg 11. for any other axle group: legal weight as per

section 9(1) AR 315/2002 Sched.9;47/2014;147/2019;28/2025

Schedule 10 Multi-Trip Steering Axle Fee Table Permitted Weight Above Legal (Tonnes) Fee Per Month ($) 0 tonne to 1 tonne 2.50 Greater than 1 tonne to 2 tonnes 12.50 Greater than 2 tonnes to 3 tonnes 21.25 Greater than 3 tonnes to 4 tonnes 37.50 Greater than 4 tonnes to 5 tonnes 56.25 Greater than 5 tonnes to 6 tonnes 75.00

Schedule 11 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 70 Greater than 6 tonnes to 7 tonnes 106.25 Greater than 7 tonnes to 8 tonnes 131.25 Greater than 8 tonnes 175.00 AR 315/2002 Sched 10;28/2025

Schedule 11 Multi-Trip Axle Group Weight Fee Table Permitted Weight Range per Single, Tandem, Tridem Axle and Tridem Drive Axle Group Above Legal (Tonnes) Fee Per Month ($) 0 tonne to 1 tonne 2.19 Greater than 1 tonne to 2 tonnes 8.75 Greater than 2 tonnes to 3 tonnes 15.00 Greater than 3 tonnes to 4 tonnes 26.25 Greater than 4 tonnes to 5 tonnes 40.00 Greater than 5 tonnes to 6 tonnes 55.00 Greater than 6 tonnes to 7 tonnes 75.00 Greater than 7 tonnes 93.75 AR 147/2019 s19l;28/2025

Schedule 12 High Load Corridor Routes (

a) Highway 1 from the junction of Highway 797 to the junction of Highway 36; (

b) Highway 2 (

i) from the junction of Highway 43 to the junction of Highway 49 (at Rycroft), and (ii) from the junction of Highway 49 (near Donnelly) to the junction of Highway 688; (

c) Highway 9 from the junction of Highway 1 to the junction of Highway 567;

Schedule 12 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 71 (

d) Highway 11 from the junction of Highway 761 to the junction of Highway 22; (

e) Highway 14 from the junction of Highway 36 to the junction of Highway 17; (

f) Highway 16 from the junction of Highway 753 to the junction of Highway 32; (

g) Highway 17 from the junction of Highway 14 to 22 kilometres north of the junction of Highway 14; (

h) Highway 19 from the junction of Highway 60 to the junction of Highway 2; (

i) Highway 21 from the junction of Highway 625 to the junction of Highway 14; (

j) Highway 22 (

i) from the junction of Highway 1A to the junction of Highway 54, and (ii) from the junction of Highway 11 to the junction of Highway 621; (

k) Highway 28 from the west junction of Highway 41 to the east junction of Highway 41; (

l) Highway 32 from the junction of Highway 16 to the junction of Highway 43; (

m) Highway 35 from the junction of Highway 986 to the Notikewin River Bridge (at Manning); (

n) Highway 36 from the junction of Highway 1 to the junction of Highway 14; (

o) Highway 39 from the junction of Highway 60 to the junction of Highway 22; (

p) Highway 41 from the junction of Highway 45 to the junction of Highway 55; (

q) Highway 43 from the east junction of Highway 32 to British Columbia; (

r) Highway 45 from the junction of Highway 36 to the junction of Highway 41; (

s) Highway 49

Schedule 12 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 72 (

i) from the junction of Highway 43 to the junction of Highway 2 (1.6 kilometres west of Donnelly), and (ii) from the junction of Highway 2 (at Rycroft) to British Columbia; (

t) Highway 54 from the junction of Highway 22 to the junction of Highway 761; (

u) Highway 55 (

i) from the junction of Highway 63 to the junction of Highway 36 and Highway 881 (at Lac La Biche), and (ii) from the junction of Highway 41 to the junction of Highway 892; (

v) Highway 60 from the junction of Highway 19 to the junction of Township Road 531A; (

w) Highway 560 from the City of Calgary to the junction of Highway 797; (

x) Highway 566 from the ju nction of Highway 9 to the junction of Highway 772; (

y) Highway 567 (

i) from the junction of Highway 772 to the junction of Highway 22, and (ii) from the City of Airdri e to the junction of Highway 9; (

z) Highway 621 from the junction of Highway 22 to the junction of Highway 753; (aa) Highway 625 from the junction of Highway 2 (at Nisku) to the junction of Highway 21; (bb) Highway 688 from the junction of Highway 2 to the junction of Highway 986; (cc) Highway 753 from the junction of Highway 621 to the junction of Highway 16; (dd) Highway 761 from the junction of Highway 54 to the junction of Highway 11; (ee) Highway 772 from the junction of Highway 566 to the junction of Highway 567;

Schedule 12 AR 315/2002 COMMERCIAL VEHICLE DIMENSION AND WEIGHT REGULATION 73 (ff) Highway 797 from the junction of Highway 560 to the junction of Highway 1; (gg) Highway 881 from the junction of Highway 36 (south of Lac La Biche) to the junction of Northland Drive (at Conklin); (hh) Highway 986 from the junction of Highway 688 to the junction of Highway 35. AR 315/2002 Sched.12;190/2005;148/2022;28/2025

Printed on Recycled Paper *9780779851997*

Document details

Collection	Alberta — Regulations
Citation	Alta. Reg. 315/2002
Type	regulation
Volume / chapter	2002 315
Language	en
Format	pdf
Source	PROVINCIAL
Identifier	d497c2d3e4446a3e975f5194fdbc62e1fd9d4790

Source file is stored in the law ingest library (pdf).