Alberta Regulation 51/2008

Marketing of Agricultural Products Act

TURKEY MARKETING AMENDMENT REGULATION

Filed: April 23, 2008

For information only: Made by Alberta Turkey Producers on February 11, 2008

pursuant to sections 26 and 27 of the Marketing of Agricultural Products Act and

approved by the Agricultural Products Marketing Council on February 15, 2008

pursuant to sections 26 and 27 of the Marketing of Agricultural Products Act.

1 The Turkey Marketing Regulation (AR 113/98) is

amended by this Regulation.

Section 12 is amended by adding the following after

subsection (4):

(4.1) The Board may direct producers who have been allocated

quotas to market part or all of their quotas to specific processors.

(4.2) If the Board directs producers to market part or all of their

quotas to specific processors under subsection (4.1), the Board

must establish rules, procedures and policies respecting the Board's

directions to producers under subsection (4.1) and must review the

rules, procedures and policies established under this subsection

annually.

--------------------------------

Alberta Regulation 52/2008

Municipal Government Act

SOUTH RED DEER REGIONAL WASTEWATER

COMMISSION REGULATION

Filed: April 23, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 142/2008)

on April 23, 2008 pursuant to

section 602.02 of the Municipal Government Act.

Table of Contents

1 Establishment

2 Members

3 Services

4 Operating deficits

5 Sale of property

6 Profit and surpluses

7 Approval

Establishment

1 A regional services commission known as the South Red Deer

Regional Wastewater Commission is established.

Members

2 The following municipalities are members of the Commission:

(

a) Town of Bowden;

(

b) Town of Innisfail;

(

c) Town of Olds;

(

d) Town of Penhold;

(

e) Mountain View County;

(

f) Red Deer County.

Services

3 The Commission is authorized to provide and operate a wastewater

supply system.

Operating deficits

4 The Commission may not assume operating deficits that are shown

on the books of any of the member municipalities.

Sale of property

5(1) The Commission may not, without the approval of the Minister,

sell any of its land, buildings, equipment or inventory whose purchase

has been funded wholly or partly by grants from the Government of

Alberta.

(2) The Minister may not approve a sale under subsection (1) unless

the Minister is satisfied

(

a) as to the repayment of the grants from the Government of

Alberta and outstanding debt associated with that portion of

the land, buildings, equipment or inventory to be sold,

(

b) that the sale would not have a significant adverse effect on

the services the Commission provides, and

(

c) that the sale will be properly reflected in the rates

subsequently charged to the customers of the Commission.

Profit and surpluses

6 Unless otherwise approved by the Minister, the Commission may

not

(

a) operate for the purposes of making a profit, or

(

b) distribute any of its surpluses to its member municipalities.

Approval

7 The Minister may make an approval under

section 5 or 6 subject to

any terms or conditions the Minister considers appropriate.

--------------------------------

Alberta Regulation 53/2008

Municipal Government Act

SYLVAN LAKE REGIONAL WASTEWATER COMMISSION REGULATION

Filed: April 23, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 143/2008)

on April 23, 2008 pursuant to

section 602.02 of the Municipal Government Act.

Table of Contents

1 Establishment

2 Members

3 Services

4 Operating deficits

5 Sale of property

6 Profit and surpluses

7 Approval

Establishment

1 A regional services commission known as the Sylvan Lake

Regional Wastewater Commission is established.

Members

2 The following municipalities are members of the Commission:

(

a) Summer Village of Birchcliff;

(

b) Summer Village of Half Moon Bay;

(

c) Summer Village of Norglenwold;

(

d) Summer Village of Sunbreaker Cove;

(

e) The Summer Village of Jarvis Bay;

(

f) Town of Sylvan Lake;

(

g) Lacombe County;

(

h) Red Deer County.

Services

3 The Commission is authorized to provide and operate a wastewater

supply system.

Operating deficits

4 The Commission may not assume operating deficits that are shown

on the books of any of the member municipalities.

Sale of property

5(1) The Commission may not, without the approval of the Minister,

sell any of its land, buildings, equipment or inventory whose purchase

has been funded wholly or partly by grants from the Government of

Alberta.

(2) The Minister may not approve a sale under subsection (1) unless

the Minister is satisfied

(

a) as to the repayment of the grants from the Government of

Alberta and outstanding debt associated with that portion of

the land, buildings, equipment or inventory to be sold,

(

b) that the sale would not have a significant adverse effect on

the services the Commission provides, and

(

c) that the sale will be properly reflected in the rates

subsequently charged to the customers of the Commission.

Profit and surpluses

6 Unless otherwise approved by the Minister, the Commission may

not

(

a) operate for the purposes of making a profit, or

(

b) distribute any of its surpluses to its member municipalities.

Approval

7 The Minister may make an approval under

section 5 or 6 subject to

any terms or conditions the Minister considers appropriate.

--------------------------------

Alberta Regulation 54/2008

Municipal Government Act

SYLVAN LAKE REGIONAL WATER COMMISSION REGULATION

Filed: April 23, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 144/2008)

on April 23, 2008 pursuant to

section 602.02 of the Municipal Government Act.

Table of Contents

1 Establishment

2 Members

3 Services

4 Operating deficits

5 Sale of property

6 Profit and surpluses

7 Approval

Establishment

1 A regional services commission known as the Sylvan Lake

Regional Water Commission is established.

Members

2 The following municipalities are members of the Commission:

(

a) Summer Village of Birchcliff;

(

b) Summer Village of Half Moon Bay;

(

c) Summer Village of Norglenwold;

(

d) Summer Village of Sunbreaker Cove;

(

e) The Summer Village of Jarvis Bay;

(

f) Town of Sylvan Lake;

(

g) Lacombe County;

(

h) Red Deer County.

Services

3 The Commission is authorized to provide and operate a water

supply system.

Operating deficits

4 The Commission may not assume operating deficits that are shown

on the books of any of the member municipalities.

Sale of property

5(1) The Commission may not, without the approval of the Minister,

sell any of its land, buildings, equipment or inventory whose purchase

has been funded wholly or partly by grants from the Government of

Alberta.

(2) The Minister may not approve a sale under subsection (1) unless

the Minister is satisfied

(

a) as to the repayment of the grants from the Government of

Alberta and outstanding debt associated with that portion of

the land, buildings, equipment or inventory to be sold,

(

b) that the sale would not have a significant adverse effect on

the services the Commission provides, and

(

c) that the sale will be properly reflected in the rates

subsequently charged to the customers of the Commission.

Profit and surpluses

6 Unless otherwise approved by the Minister, the Commission may

not

(

a) operate for the purposes of making a profit, or

(

b) distribute any of its surpluses to its member municipalities.

Approval

7 The Minister may make an approval under

section 5 or 6 subject to

any terms or conditions the Minister considers appropriate.

Alberta Regulation 55/2008

Post-secondary Learning Act

LONG-RANGE PLANS AND COMMERCIAL PURPOSE DEFINITION

AMENDMENT REGULATION

Filed: April 23, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 155/2008)

on April 23, 2008 pursuant to

section 124 of the Post-secondary Learning Act.

1 The Long-range Plans and Commercial Purpose

Definition Regulation (AR 54/2004) is amended by this

Regulation.

2 The title of the Regulation is repealed and the following

is substituted:

LAND USE REGULATION

3 The following is added before

section 1:

Part 1

Long-range Plans and Commercial

Purposes Definition

4 The heading before

section 3 is repealed.

5 The following is added after

section 10:

Part 2

Support Services Definition

Support services defined

10.1 For the purposes of

section 67(1.1)(

b) of the Act, "support

services" means any services offered or provided to the students,

faculty or staff of a public post-secondary institution including,

without limitation,

(

a) academic and staff association services,

(

b) student organization services,

(

c) convenience stores and food and beverage services,

(

d) book stores and study-support and office-support

services,

(

e) audio-visual, entertainment, communications and

information technology services,

(

f) financial, daycare, health and other personal and daily

living services, and

(

g) parking and residential services.

6 The heading before

section 11 is repealed and the

following is substituted:

Part 3

Transitional Matters, Expiry

and Coming into Force

--------------------------------

Alberta Regulation 56/2008

Marketing of Agricultural Products Act

ALBERTA MILK PLAN MINIMUM PRICE FOR

SUB-CLASS 1A MILK ORDER

Filed: April 25, 2008

For information only: Made by the Alberta Utilities Commission on April 18, 2008

pursuant to

section 5(4) of the Alberta Milk Plan Regulation (AR 150/2002).

Minimum price for sub-class 1a milk

1 The minimum price for sub-class 1a milk to be paid by processors

for a hectolitre of sub-class 1a milk is $85.33.

Repeal

2 The Alberta Milk Plan Minimum Price for Sub-class 1a Milk Order

(AR 44/2008) is repealed.

Coming into force

3 This Order comes into force on May 15, 2008.

Alberta Regulation 57/2008

Apprenticeship and Industry Training Act

PARTS TECHNICIAN TRADE REGULATION

Filed: April 29, 2008

For information only: Made by the Alberta Apprenticeship and Industry Training

Board on March 14, 2008 pursuant to

section 33(2) of the Apprenticeship and

Industry Training Act and approved by the Minister of Advanced Education and

Technology on April 21, 2008 pursuant to

section 33(2) of the Apprenticeship and

Industry Training Act.

Table of Contents

Definitions

Part 1

General Matters Respecting the Trade

2 Constitution of the trade

3 Tasks, activities and functions

4 Supervision, etc. of apprentices

Part 2

Parts Technician Branch of the Trade

5 Definition

Trade Matters Respecting the Branch

6 Undertakings constituting the branch

7 Tasks, activities and functions

Apprenticeship

8 Term of the apprenticeship program re parts technician

9 Employment of apprentices re parts technician

10 Wages re parts technician

Part 3

Materials Technician Branch of the Trade

11 Definition

Trade Matters Respecting the Branch

12 Undertakings constituting the branch

13 Tasks, activities and functions

Apprenticeship

14 Term of the apprenticeship program re materials technician

15 Employment of apprentices re materials technician

16 Wages re materials technician

Part 4

Transitional Provisions, Repeal, Expiry and Coming into

Force

17 Apprenticeship continues

18 Repeal

19 Expiry

20 Coming into force

Definitions

1 In this Regulation,

(a) "apprentice" means a person who is an apprentice in the

trade;

(b) "certified journeyperson" means a certified journeyperson as

defined in the Apprenticeship Program Regulation

(AR 258/2000);

(c) "technical training" means technical training as defined in the

Apprenticeship Program Regulation (AR 258/2000);

(d) "trade" means the occupation of parts technician that is

designated as an optional certification trade pursuant to the

Apprenticeship and Industry Training Act;

(e) "uncertified journeyperson" means an uncertified

journeyperson as defined in the Apprenticeship Program

Regulation (AR 258/2000).

Part 1

General Matters Respecting

the Trade

Constitution of the trade

2(1) The undertakings set out in sections 6 and 12 constitute the trade.

(2) The trade is made up of the following:

(

a) the parts technician branch of the trade;

(

b) the materials technician branch of the trade.

Tasks, activities and functions

3 When practising or otherwise carrying out work in the trade, the

tasks, activities and functions set out in sections 7 and 13 come within

the trade.

Supervision, etc. of apprentices

4(1) Where, in respect of a branch of the trade, a person is a certified

journeyperson or an uncertified journeyperson and is to provide

supervision to an apprentice, that journeyperson is eligible to supervise

that apprentice only

(

a) in respect of the undertakings that constitute that branch, and

(

b) in respect of tasks, activities and functions that come within

that branch,

for which that person is a certified journeyperson or an uncertified

journeyperson.

(2) Where a person is an apprentice in an apprenticeship program in a

branch of the trade and is employed in respect of another branch of the

trade, that apprentice is eligible to carry out work only

(

a) in respect of the undertakings that constitute that branch, and

(

b) in respect of tasks, activities and functions that come within

that branch,

for which that person is an apprentice.

Part 2

Parts Technician Branch of the Trade

Definition

5 In this Part, "parts" means any part, assembly or accessory

pertaining to the following:

(

a) automobiles and trucks;

(

b) aviation;

(

c) electronics;

(

d) heavy duty vehicles and equipment;

(

e) agricultural equipment;

(

f) industrial equipment;

(

g) military equipment;

(

h) motorcycles;

(

i) outdoor power equipment;

(

j) recreational vehicles and equipment;

(

k) marine equipment;

(

l) turf equipment;

(

m) appliances.

Trade Matters Respecting the Branch

Undertakings constituting the branch

6 The undertakings that constitute the parts technician branch of the

trade are the stock handling, inventory control, storing, securing,

identifying, cataloguing, ordering, shipping, transporting, receiving,

inspecting, pricing, purchasing, issuing, marketing and selling of parts.

Tasks, activities and functions

7 When practising or otherwise carrying out work in the parts

technician branch of the trade, the following tasks, activities and

functions come within that branch of the trade:

(

a) assessing customer requirements and providing the parts

necessary for service, repair or replacement;

(

b) using electronic and non-electronic location systems,

identification systems, communication systems and business

procedures for the purpose of managing inventory and

addressing customer needs;

(

c) selling and distributing parts;

(

d) selecting, operating and basic maintenance of hand tools and

material handling equipment;

(

e) wrapping, packaging, labelling and strapping parts;

(

f) planning, maintaining and updating display areas;

(

g) operating and managing tool crib.

Apprenticeship

Term of the apprenticeship program re parts technician

8(1) Subject to credit for previous training or experience being

granted pursuant to an order of the Board, the term of an

apprenticeship program for the parts technician branch of the trade is 3

periods of not less than 12 months each.

(2) In the first period of the apprenticeship program an apprentice

must acquire not less than 1500 hours of on the job training and

successfully complete the technical training that is required or

approved by the Board.

(3) In the 2nd period of the apprenticeship program an apprentice

must acquire not less than 1500 hours of on the job training and

successfully complete the technical training that is required or

approved by the Board.

(4) In the 3rd period of the apprenticeship program an apprentice must

acquire not less than 1500 hours of on the job training and successfully

complete the technical training that is required or approved by the

Board.

Employment of apprentices re parts technician

9(1) Where, with respect to the employment of apprentices in the

parts technician branch of the trade, a person employs an apprentice,

that employment must be carried out in accordance with this section.

(2) Subject to subsection (3), a person who is a certified journeyperson

or an uncertified journeyperson in the parts technician branch of the

trade or employs a certified journeyperson or an uncertified

journeyperson in that branch may employ 2 apprentices in that branch

and 2 additional apprentices in that branch for each additional certified

journeyperson or uncertified journeyperson in that branch that is

employed by that person.

(3) Subsection (2) does not apply to an apprentice who is engaged in

an apprenticeship program

(

a) in the parts technician branch of the trade and has completed

all the requirements required or approved by the Board for

advancement into the 3rd period of that apprenticeship

program, or

(

b) in the materials technician branch of the trade and has

completed all the requirements required or approved by the

Board for advancement into the 3rd period of that

apprenticeship program.

(4) For the purposes of subsection (2), a person who is a certified

journeyperson or an uncertified journeyperson in the parts technician

branch of the trade or employs a certified journeyperson or an

uncertified journeyperson in the parts technician branch of the trade,

instead of employing an apprentice in an apprenticeship program in the

parts technician branch of the trade, may employ an apprentice in an

apprenticeship program in the materials technician branch of the trade

to carry out any of the undertakings that constitute the materials

technician branch of the trade.

Wages re parts technician

10(1) With respect to the payment of wages to an apprentice in an

apprenticeship program in the parts technician branch of the trade, a

person shall not, subject to the Apprenticeship Program Regulation

(AR 258/2000), pay wages to an apprentice that are less than those

provided for under subsection (2).

(2) Subject to the Employment Standards Code, a person employing

an apprentice referred to in subsection (1) must pay wages to the

apprentice that are at least equal to the following percentages of the

wages paid to employees who are certified journeypersons or

uncertified journeypersons in the parts technician branch of the trade:

(a) 65% in the first period of the apprenticeship program;

(b) 75% in the 2nd period of the apprenticeship program;

(c) 85% in the 3rd period of the apprenticeship program.

Part 3

Materials Technician Branch

of the Trade

Definition

11 In this Part, "commodities" includes any product, substance or

organism pertaining to the following:

(

a) consumer services or products;

(

b) agricultural services or products;

(

c) transportation services or products;

(

d) natural resource products;

(

e) manufacturing products;

(

f) services or products for all levels of government.

Trade Matters Respecting the Branch

Undertakings constituting the branch

12 The undertakings that constitute the materials technician branch of

the trade are the stock handling, inventory control, storing, securing,

identifying, cataloguing, ordering, shipping, transporting, receiving,

inspecting, pricing, purchasing, issuing, marketing and selling of

commodities.

Tasks, activities and functions

13 When practising or otherwise carrying out work in the materials

technician branch of the trade, the following tasks, activities and

functions come within that branch of the trade:

(

a) assessing customer requirements and providing the

commodities necessary for service, repair or replacement;

(

b) using electronic and non-electronic location systems,

identification systems, communication systems and business

procedures for the purpose of managing inventory and

addressing customer needs;

(

c) selling and distributing commodities;

(

d) selecting, operating and basic maintenance of hand tools and

material handling equipment;

(

e) wrapping, packaging, labelling and strapping commodities;

(

f) planning, maintaining and updating display areas;

(

g) operating and managing tool crib.

Apprenticeship

Term of the apprenticeship program re materials technician

14(1) Subject to credit for previous training or experience being

granted pursuant to an order of the Board, the term of an

apprenticeship program for the materials technician branch of the trade

is 3 periods of not less than 12 months each.

(2) In the first period of the apprenticeship program an apprentice

must acquire not less than 1500 hours of on the job training and

successfully complete the technical training that is required or

approved by the Board.

(3) In the 2nd period of the apprenticeship program an apprentice

must acquire not less than 1500 hours of on the job training and

successfully complete the technical training that is required or

approved by the Board.

(4) In the 3rd period of the apprenticeship program an apprentice must

acquire not less than 1500 hours of on the job training and successfully

complete the technical training that is required or approved by the

Board.

Employment of apprentices re materials technician

15(1) Where, with respect to the employment of apprentices in the

materials technician branch of the trade, a person employs an

apprentice, that employment must be carried out in accordance with

this section.

(2) Subject to subsection (3), a person who is a certified journeyperson

or an uncertified journeyperson in the materials technician branch of

the trade or employs a certified journeyperson or an uncertified

journeyperson in that branch may employ 2 apprentices in that branch

and 2 additional apprentices in that branch for each additional certified

journeyperson or uncertified journeyperson in that branch that is

employed by that person.

(3) Subsection (2) does not apply to an apprentice who is engaged in

an apprenticeship program

(

a) in the materials technician branch of the trade and has

completed all the requirements required or approved by the

Board for advancement into the 3rd period of that

apprenticeship program, or

(

b) in the parts technician branch of the trade and has completed

all the requirements required or approved by the Board for

advancement into the 3rd period of that apprenticeship

program.

(4) For the purposes of subsection (2), a person who is a certified

journeyperson or an uncertified journeyperson in the materials

technician branch of the trade or employs a certified journeyperson or

an uncertified journeyperson in the materials technician branch of the

trade, instead of employing an apprentice in an apprenticeship program

in the materials technician branch of the trade, may employ an

apprentice in an apprenticeship program in the parts technician branch

of the trade to carry out any of the undertakings that constitute the

parts technician branch of the trade.

Wages re materials technician

16(1) With respect to the payment of wages to an apprentice in an

apprenticeship program in the materials technician branch of the trade,

a person shall not, subject to the Apprenticeship Program Regulation

(AR 258/2000), pay wages to an apprentice that are less than those

provided for under subsection (2).

(2) Subject to the Employment Standards Code, a person employing

an apprentice referred to in subsection (1) must pay wages to the

apprentice that are at least equal to the following percentages of the

wages paid to employees who are certified journeypersons or

uncertified journeypersons in the materials technician branch of the

trade:

(a) 65% in the first period of the apprenticeship program;

(b) 75% in the 2nd period of the apprenticeship program;

(c) 85% in the 3rd period of the apprenticeship program.

Part 4

Transitional Provisions, Repeal,

Expiry and Coming into Force

Apprenticeship continues

17 A person who immediately prior to May 1, 2008 was an

apprentice in an apprenticeship program under the Parts Technician

Trade Regulation (AR 293/2000) continues as an apprentice in that

apprenticeship program under this Regulation.

Repeal

18 The Parts Technician Trade Regulation (AR 293/2000) is

repealed.

Expiry

19 For the purpose of ensuring that this Regulation is reviewed for

ongoing relevancy and necessity, with the option that it may be

repassed in its present or an amended form following a review, this

Regulation expires on August 31, 2013.

Coming into force

20 This Regulation comes into force on May 1, 2008.

Alberta Regulation 58/2008

Apprenticeship and Industry Training Act

HAIRSTYLIST TRADE AMENDMENT REGULATION

Filed: April 29, 2008

For information only: Made by the Alberta Apprenticeship and Industry Training

Board on March 14, 2008 pursuant to

section 33(2) of the Apprenticeship and

Industry Training Act and approved by the Minister of Advanced Education and

Technology on April 21, 2008 pursuant to

section 33(2) of the Apprenticeship and

Industry Training Act.

1 The Hairstylist Trade Regulation (AR 281/2000) is

amended by this Regulation.

Section 3(

d) is amended by striking out "cleaning" and

substituting "cleansing".

--------------------------------

Alberta Regulation 59/2008

Alberta Treasury Branches Act

ALBERTA TREASURY BRANCHES (ASSET-BACKED COMMERCIAL

PAPER, 2008) AMENDMENT REGULATION

Filed: April 30, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 170/2008)

on April 30, 2008 pursuant to

section 34 of the Alberta Treasury Branches Act.

1 The Alberta Treasury Branches Regulation (AR 187/97) is

amended by this Regulation.

Section 8 is amended

(

a) in subsection (2) by striking out "and

section 30(2),

"loan" includes a guarantee" and substituting ",

section

10(5) and

section 30(2), references to the making of a loan

are to be taken to include references to the guaranteeing of

persons' obligations and for the purposes of

section 18(2)(

c) of the Act "investment" includes anything into which money

may be placed as a result of subsection (5)(m)";

(

b) in subsection (5) by adding the following after

clause (l):

(

m) investments in notes issued by master asset

partnerships, as contemplated in the Framework

Agreement executed by ATB and other members of the

Pan-Canadian Third Party Asset-Backed Commercial

Paper Investors Committee that became effective on

December 23, 2007, including the results of

participation in any related margin funding facility or

other actions or agreements to be entered into in

furtherance of the proposed restructuring contemplated

in that Agreement, as approved by the board.

Section 10 is amended

(

a) in subsection (2.3) by striking out "ATB" and

substituting "Notwithstanding subsection (1), ATB";

(

b) by adding the following after subsection (4):

(5) Notwithstanding subsection (1), ATB may enter into credit

derivative contracts for the purpose of hedging investments

referred to in

section 8(5)(

m) against any risks to which they

may be subject.

--------------------------------

Alberta Regulation 60/2008

Stray Animals Act

STRAY ANIMALS AMENDMENT REGULATION

Filed: April 30, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 172/2008)

on April 30, 2008 pursuant to

section 35 of the Stray Animals Act.

1 The Stray Animals Regulation (AR 301/96) is amended by

this Regulation.

Section 2 is amended

(

a) by striking out "section 1(d)" and substituting "section

1(c)";

(

b) by repealing clause (e).

Alberta Regulation 61/2008

Provincial Court Act

PROVINCIAL COURT JUDGES AND MASTERS IN CHAMBERS

COMPENSATION AMENDMENT REGULATION

Filed: April 30, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 184/2008)

on April 30, 2008 pursuant to

section 9.52 of the Provincial Court Act.

1 The Provincial Court Judges and Masters in Chambers

Compensation Regulation (AR 176/98) is amended by this

Regulation.

Section 1 is amended by adding the following after

subsection (3.4):

(3.5) For the period February 4, 2008 to March 31, 2009, the

salary to be paid to the Deputy Chief Judge is $231 250 per year.

Section 1.1 is amended by adding ", Deputy Chief Judge"

after "as Chief Judge" wherever it occurs.

Section 6 is amended by adding "and Deputy Chief Judge"

after "Chief Judge".

Section 2 is deemed to have come into force on

February 4, 2008.

--------------------------------

Alberta Regulation 62/2008

Environmental Protection and Enhancement Act

ENVIRONMENTAL ASSESSMENT (MANDATORY AND EXEMPTED

ACTIVITIES) AMENDMENT REGULATION

Filed: April 30, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 185/2008)

on April 30, 2008 pursuant to

section 59 of the Environmental Protection and

Enhancement Act.

1 The Environmental Assessment (Mandatory and

Exempted Activities) Regulation (AR 111/93) is amended by

this Regulation.

Schedule 1 is amended by repealing item (m).

Schedule 2 is amended in item (a)(vi) by striking out

"with a voltage of less than 130 kilovolts".

--------------------------------

Alberta Regulation 63/2008

Environmental Protection and Enhancement Act

CONSERVATION AND RECLAMATION AMENDMENT REGULATION

Filed: April 30, 2008

For information only: Made by the Lieutenant Governor in Council (O.C. 186/2008)

on April 30, 2008 pursuant to

section 146 of the Environmental Protection and

Enhancement Act.

1 The Conservation and Reclamation Regulation

(AR 115/93) is amended by this Regulation.

Section 17.1 is amended by adding the following after

clause (c):

(

d) an operator that has, or applies for, an approval for the

construction, operation or reclamation of a transmission line.

3 The following is added after

section 25:

Expiry

25.1 For the purpose of ensuring that this Regulation is reviewed

for ongoing relevancy and necessity, with the option that it may be

repassed in its present or an amended form following a review, this

Regulation expires on April 30, 2013.