(

a) Every person who digs, bores, or drills a water well, cathodic protection well, groundwater monitoring well, or geothermal heat exchange well, abandons or destroys such a well, or deepens or reperforates such a well, shall file with the department a report of completion of that well within days from the date its construction, alteration, abandonment, or destruction is completed. (

b) The report shall be made on forms furnished by the department and shall contain information as follows:

(1) In the case of a water well, cathodic protection well, or groundwater monitoring well, the report shall contain information as required by the department, including, but not limited to all of the following information: (

A) A description of the well site sufficiently exact to permit location and identification of the well. (

B) A detailed log of the well. (

C) A description of type of construction. (

D) The details of perforation. (

E) The methods used for sealing off surface or contaminated waters. (

F) The methods used for preventing contaminated waters of one aquifer from mixing with the waters of another aquifer. (

G) The signature of the well driller.

(2) In the case of a geothermal heat exchange well, the report shall contain all of the following information: (

A) A description of the site that is sufficiently exact to permit the location and identification of the site and the number of geothermal heat exchange wells drilled on the same lot. (

B) A description of borehole diameter and depth and the type of geothermal heat exchange system installed. (

C) The methods and materials used to seal off surface or contaminated waters. (

D) The methods used for preventing contaminated water in one aquifer from mixing with the water in another aquifer. (

E) The signature of the well driller.